Low Low Miles!!! Clean! 1 Owner! W/plow! on 2040-cars

Auto blog

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Chicago Auto Show: The really big reveals from shows past

The 2024 Chicago Auto Show may seem like a shell of its former self, but it still holds the title of the largest consumer auto show in the United States. It didn't get that reputation simply by being efficiently produced or convenient for locals desperate for something to do in February — it earned it over decades of breaking automotive news and powerhouse reveals, eventually earning an informal designation as America's truck show.  2024 may be a down year for Chicago, but let's not forget all of the great things that have come out of it, historically. Here's a look at some of our staff favorites. Bet you didn't know about a few of these cars that were first revealed in the Windy City.    2008 Dodge Challenger SRT-8  I didn't just pick this one as a former Challenger owner, but instead to illustrate just how many cool Chicago debuts we take for granted. Chrysler often chose its home turf to debut new cars, so the few times its unveilings happened elsewhere tend to stick in our minds. The first Challenger SRT-8 was kind of garbage, if we're being honest. I mean, who buys a race-bred, V8-powered muscle car without a limited-slip differential? But the SRT-8 formula evolved over time into something truly special, and what we saw in Chicago was essentially the early version of the Scat Pack, which was ultimately very successful for Dodge. And who would have thought we'd be here, 15 years later, still talking about that debut? And still loving these big Mopars, flaws and all. — Associate Editor Byron Hurd SHO time in Chicago IÂ’ll always have a certain fondness for the return of the Taurus SHO at the 2009 Chicago Auto Show. Chicago has always leaned truck and van heavy for press reveals, but every now and then, as this list illustrates, something spicy would appear. The return of the SHO as a high-powered successor to the original that ran from 1989-1999 gave enthusiasts hope for FordÂ’s performance business, especially for sedans. With a 3.5-liter EcoBoost V6 packing 365 hp, all-wheel drive and five-spoke wheels, the SHO was a nice upgrade from the lower-rung Taurus models. It was a bit more sedate than the original SHOÂ’s Yamaha-sourced V6 that teamed with a five-speed manual transmission, but still a worthy response to the Chrysler 300, Dodge Charger and later the Chevy SS. The SHO — Super High Output — begat things like the Fusion ST and gave Ford solid four-door performance for the rest of the decade.

Dodge Journey to get a performance-focused replacement in 2022?

The Dodge Journey is neither fast nor agile, but it has proved a hard-to-hit target for everyone trying to figure out what the next generation will hold, including Fiat Chrysler. In 2014, the automaker's five-year plan for Dodge included an all-new Journey in 2016, and a hotted-up SRT version of the crossover come 2017. In 2016, "supplier sources" told Automotive News a new Journey on rear-drive Alfa Romeo's Giorgio platform would show for the 2019 model year, and production would be moved from Mexico to Italy, Those prognostications came to naught, the 11-year-old Journey riding on its Mitsubishi-based platform into 2020 with fewer options. Now Mopar Insiders says the next-gen Journey could come in 2022 as an early 2023 model, still on the Giorgio platform and given a performance-focused brief. According to MI, the new Journey — and it's not clear if the name will be retained — comes in strict two-row, five-seater guise. It "will be around the size of the Stelvio," the Alfa Romeo coming in at 184.5 inches. Previous reports have said the Journey will be shorter than the current 192.4-inch model, but longer than the Stelvio. The Dodge Charger is said to donate major styling cues, and there will supposedly be a Scat Pack trim. Under the hood, the entry-level engine will be the same GME 2.0-liter four-cylinder in that makes 276 horsepower and 306 pound-feet of torque in the Stelvio. MI believes a Hemi V8 will make the options list, hence the Scat Pack. Previously, other outlets have figured a turbo V6 like that in the Alfa Quadrifoglio models will stand in as the upgrade, although the model is "being developed with V8s in mind." Any engine choice is expected to be paired with an eight-speed transmission. All of those options far outdo the 2.4-liter four-cylinder with 172 hp and 165 lb-ft, shifting through a four-speed automatic, which is the only powertrain possible for the 2020 Journey. The platform switch and the change to rear-drive will greatly enhance on-road manners and performance, but MI believes an all-wheel-drive option should make the transition. If Journey production moves to Italy from Mexico, Fiat Chrysler will open up capacity in North America for big-profit crossovers and trucks, and get more from its underutilized European operations. Rumor says the Journey would roll down the same lines as the Stelvio in the Cassino Assembly Plant; the crossover is still sold in Europe and other markets as the Fiat Freemont.