Dodge Ram Slt 2500 on 2040-cars

Auto blog

Junkyard Gem: 1988 Dodge Aries America LE Station Wagon

During the late 1970s, Chrysler appeared doomed as outdated car designs and a second catastrophic oil crisis caused by Middle Eastern conflict hammered sales. Chrysler had some successful economy cars made by Mitsubishi or based on Simca designs, but the need for an efficient, modern front-wheel-drive platform grew desperate. After a government bailout in 1979 bought some time, CEO Lee Iacocca masterminded the creation of the all-new K Platform, which hit showrooms for the 1981 model year. The first two K-Cars, the Plymouth Reliant and Dodge Aries, were big sales successes, and Chrysler went on building vehicles based on the platform through 1995. Here's an example of the later Aries wagon, found in a Phoenix self-service wrecking yard. The "true" K-Cars were the Aries, the Plymouth Reliant, the Chrysler LeBaron, and the Dodge 400. They have become very rare in wrecking yards today, so I honor their historical significance by documenting the ones I find. During my junkyard expeditions, I have photographed this '81 Aries wagon, this '81 Reliant wagon, this '82 Aries wagon, this '82 400 coupe, this '82 LeBaron convertible, this '83 Aries sedan, this '83 LeBaron Town & Country wagon, this '85 LeBaron woodie convertible, this '86 Aries sedan, this '86 LeBaron Town & Country wagon, this '86 Reliant wagon, and this '89 Reliant coupe. The early K-Cars could be purchased with optional Mitsubishi Astron 2.6-liter four-cylinder (complete with "HEMI 2.6" badging), but in 1988, the choices were down to a 93-horsepower 2.2-liter Chrysler-built four-cylinder or a 2.5-liter version of the same engine rated at 96 horses and 13 extra pound-feet of torque. This car has the 2.2. The "America LE" trim level was the only one available for the 1988 Aries, and it resulted in a fairly Spartan car. Tough, scratchy cloth upholstery and lots of hard plastic were the order of the day. The MSRP on this car started at $7,695, or about $16,770 in 2018 dollars. That's a lot of car for that kind of money. For comparison, the rear-wheel-drive (and much bigger) 1988 Pontiac Safari wagon went for nearly twice that price. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. By 1988, the Aries wagon was looking pretty old, but it was a bargain.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

FCA recalls 15k Grand Cherokees, Durangos over brake issues

The Basics: Fiat Chrysler Automobiles is recalling 14,768 examples of the Jeep Grand Cherokee and Dodge Durango, both from the 2015 and 2016 model years, and built between December 9, 2015, and January 14, 2016. The Problem: The left front brake caliper on some vehicles may have been made from the wrong type of iron, and could be prone to crack. A cracked brake caliper may not function properly. Injuries/Deaths: None reported. The problem was discovered by the automaker during testing. The fix: Dealers will need to check the casting date of the component in question, and if necessary, replace the brake caliper. The schedule for carrying out the recall service has yet to be outlined. If you own one: Expect to hear from the manufacturer to arrange an appointment with your local dealer. Related Video: RECALL Subject : Front Left Brake Caliper May Break Report Receipt Date: MAR 23, 2016 NHTSA Campaign Number: 16V168000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 14,768 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material. CONSEQUENCE: A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S16. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.