Cummins Diesel Leather Sirius Xd Wheels Nitto Lifted N-fab Grille Lone Star on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Dodge Journey to get a performance-focused replacement in 2022?

The Dodge Journey is neither fast nor agile, but it has proved a hard-to-hit target for everyone trying to figure out what the next generation will hold, including Fiat Chrysler. In 2014, the automaker's five-year plan for Dodge included an all-new Journey in 2016, and a hotted-up SRT version of the crossover come 2017. In 2016, "supplier sources" told Automotive News a new Journey on rear-drive Alfa Romeo's Giorgio platform would show for the 2019 model year, and production would be moved from Mexico to Italy, Those prognostications came to naught, the 11-year-old Journey riding on its Mitsubishi-based platform into 2020 with fewer options. Now Mopar Insiders says the next-gen Journey could come in 2022 as an early 2023 model, still on the Giorgio platform and given a performance-focused brief. According to MI, the new Journey — and it's not clear if the name will be retained — comes in strict two-row, five-seater guise. It "will be around the size of the Stelvio," the Alfa Romeo coming in at 184.5 inches. Previous reports have said the Journey will be shorter than the current 192.4-inch model, but longer than the Stelvio. The Dodge Charger is said to donate major styling cues, and there will supposedly be a Scat Pack trim. Under the hood, the entry-level engine will be the same GME 2.0-liter four-cylinder in that makes 276 horsepower and 306 pound-feet of torque in the Stelvio. MI believes a Hemi V8 will make the options list, hence the Scat Pack. Previously, other outlets have figured a turbo V6 like that in the Alfa Quadrifoglio models will stand in as the upgrade, although the model is "being developed with V8s in mind." Any engine choice is expected to be paired with an eight-speed transmission. All of those options far outdo the 2.4-liter four-cylinder with 172 hp and 165 lb-ft, shifting through a four-speed automatic, which is the only powertrain possible for the 2020 Journey. The platform switch and the change to rear-drive will greatly enhance on-road manners and performance, but MI believes an all-wheel-drive option should make the transition. If Journey production moves to Italy from Mexico, Fiat Chrysler will open up capacity in North America for big-profit crossovers and trucks, and get more from its underutilized European operations. Rumor says the Journey would roll down the same lines as the Stelvio in the Cassino Assembly Plant; the crossover is still sold in Europe and other markets as the Fiat Freemont.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.