2010 Dodge Ram 2500 Custom Dually Short Bed 4x4 Clean Carfax Slt Very Clean on 2040-cars

Auto blog

Ford Police Interceptors dominate Michigan State Police testing

Once again, Ford Motor Company builds the fastest police vehicles. The Blue Oval touted the news in an official release following Michigan State Police and Los Angeles County Sheriff's Department testing. Ford did very well. Except for one acceleration metric – zero to 10 miles per hour – the Blue Oval's Taurus and Explorer-based cop cars were the quickest, with particular praise coming for the EcoBoost-powered models, which bested Chevrolet and Dodge's V8-powered variants. Dearborn's products also posted the fastest average times around MSP's vehicle dynamics course. But it wasn't all positive for Ford. The only four-cylinder in the contest, the 2.0-liter, EcoBoost Ford SSP Sedan, had both the lowest top speed, 120 mph, and the slowest acceleration figures. It was also the slowest in track testing. Ford's products also failed to match the braking and top speeds of its rivals from Detroit and Auburn Hills – the rear-drive Charger Pursuit posted the best braking stats of the entire test, while the V8-powered Chevrolet Caprice hit the highest top speed, at 155 mph. Ford did score a top speed award, among SUVs, but at 132 mph, the naturally aspirated Police Interceptor Utility had to share its award with the equally fast, rear-drive Chevrolet Tahoe. The LA County Sheriff's timing isn't publicly available, but according to Ford, the EcoBoost-powered police cars put on a similarly impressive show for cops on the West Coast. We've assembled a spreadsheet on Google Docs that offers an easy to browse comparison of the different stats assembled by the Michigan State Police, and divided the vehicles between standard V6-powered sedans, high-performance sedans (EcoBoost and V8 models), and SUVs. You can check it out here. Related Video:

Cold start comparison: 2020 Alfa Romeo Giulia Quadrifoglio vs. 2013 Dodge Challenger SRT8

The 2020 Alfa Romeo Giulia Quadrifoglio is a five-seat, compact luxury sport sedan packing 505 horsepower thanks to a 2.9-liter twin-turbocharged V6. My personal 2013 Dodge Challenger SRT8 392 is ... well ... not. It's a full-sized muscle coupe whose iron-block 6.4-liter V8 makes 470 hp in the very traditional way: it's freakin' huge, like everything else about the car.  On paper, these two have nothing in common beyond the fact that they were built by the same multi-national manufacturing entity.  But if paper were the be-all and end-all of automotive rankings, everybody would buy the same car. And we don't, especially as enthusiasts. Whether it's looks or tuning or vague "intangibles" or something as simple as the way a car sounds, we often put a priority on the things that trigger our emotions rather than setting out to simply buy whatever the "best" car is at that particular moment.  So, what do these two have in common? They both sound really, really good. Like looks, sounds are subjective. While a rubric most assuredly exists in the world of marketing (attraction is as much a science as any other human response), we have no way of objectively scoring the beauty of either of these cars, and the same applies to the qualities of the sound waves being emitted through their tail pipes.  But we can measure how loud they are. In fact, there's even an app for that. Dozens, as it turns out. So, I picked one at random that recorded peak loudness levels, and set off to conduct an entirely pointless and only vaguely scientific experiment with the two cars that happened to be in my garage at the same time.  For the test, I opened up a window and cracked the garage door (so as not to inflict carbon monoxide poisoning upon myself in the name of discovery), and then placed my phone on a tripod behind the center of each car's trunk lid. I fired each one up and let the app do the rest. I then placed my GoPro on top of the trunk for each test so that I could review the video afterward for any anomalies.  I started with the Challenger. The 6.4-liter Hemi under the hood of this big coupe is essentially the same lump found under the hood of quite a few Ram pickups, and it has the accessories to prove it. Its starter is loud and distinctive. Almost as loud, it turns out, as the exhaust itself. As its loud pew-pew faded behind the V8's barking cold start, we recorded a peak of 83.7 decibels. In the app's judgment, that's roughly the equivalent of a busy street.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat