2008 Dodge Ram 2500 Diesel 4x4 Slt Lone Star 1 Texas Owner Quad Cab on 2040-cars

Auto blog

Watch these Dodge Demons explode on a Texas drag strip

The Dodge Challenger SRT Demon is extremely quick. It can hit 60 mph from a dead stop in less time than it takes to read this sentence thanks to its supercharged 6.2-liter V8. That engine makes up to 840 horsepower and 770 pound-feet of torque, depending on what octane is running through the fuel lines. That's a ton of power going solely to the rear wheels. So much so that Dodge developed a number of features and a new set of tires specifically for the car. In our time with the Demon, the car took abuse run after run on a drag strip without skipping a beat, but it seems some actual owners aren't quite so lucky. Just take a look at what happened to a few of these cars. You can see the whole car shake and jitter right as the whole rear explodes in front of the tree. It seems the initial shock from the launch — the most taxing bit of any drag run — is what kills the differentials. Catastrophic failure is rarely pretty, but it is neat to see the whole thing occur in slow motion. Three more cars — four stock and one modified in total — suffered similar fates. Not a great look for Dodge or SRT. According to The Drive, a private drag event in Texas drew a number of Demon owners all trying to beat NHRA NHRA Top Fuel racer Leah Pritchett's time in her personal Dodge Demon — 42 stock Demons attended along with five modified cars. While no one managed to match her 9.65-second quarter-mile run, a few owners did dip below 10 seconds. Now, there are a few of caveats we must address. First, with any modified car, you run the risk of breaking something, even with a car that's set up from stock specifically for drag strips. Even a set of tires like the Mickey Thompsons shown in the video above can have an effect on driveline components. Horsepower may be king, but it's torque that's the rear killer. All that torque sends a shock through the car. Adding even more with aftermarket parts increases the risk of something failing. The modified car was apparently pushing out about 1,000 horsepower. That said, four of the five vehicles were stock, so any extra power or torque should theoretically be a non-factor. The drag strip's surface was maintained by a company called Mass Traction. FCA used Mass Traction during the Demon's development, so that too should be a non-factor in the part's failure. It's unclear what exactly caused the failures, though The Drive reports that FCA officials are investigating the matter. Related Video: This content is hosted by a third party.

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.

Marchionne says no offers are on the table for Fiat Chrysler

MONZA, Italy (Reuters) - Fiat Chrysler (FCA) has not received any offer for the company nor is the world's seventh-largest carmaker working on any "big deal", Chief Executive Sergio Marchionne said on Saturday. Speaking on the sidelines of the Italian Formula One Grand Prix, Marchionne said the focus remained on executing the company's business plan to 2018. Asked whether FCA had been approached by someone or whether there was an offer on the table, he simply said: "No." The company's share price jumped to record highs last month after reports of interest for the group or some of its brands from China. China's Great Wall Motor Co Ltd openly said it was interested in FCA, but had not held talks or signed a deal with executives at the Italian-American automaker. The stock move was also helped by expectations that the company might separate from some of its units. Marchionne reiterated on Saturday that FCA was working on a plan to "purify" its portfolio and that units, such as the components businesses, would be separated from the group. He hopes to complete that process by the end of 2018. "There are activities within the group that do not belong to a car manufacturer, for example the components businesses. The group needs to be cleared of those things," he told journalists. Asked whether an announcement could come this year, Marchionne said it was up to the board to decide and that it would next meet at the end of September. He said the time was not right for a spin-off of luxury brand Maserati and premium Alfa Romeo and the two brands needed to become self-sustainable entities first and "have the muscle to stand on their feet, make sufficient cash". "The way we see it now, it's almost impossible, if not impossible, to see a spin-off of Alfa Romeo/Maserati, these are two entities that are immature and in a development phase," he said. "It's the wrong moment, we are not in a condition to do it." He said the concept of separating the two brands from FCA's mass market business made sense and did not rule out this happening in future, but not under his tenure, which lasts until April 2019. "If there is an opportunity in future, it would certainly happen after I'm gone. It won't happen while Marchionne is around," he said.