2007 Dodge Ram 2500 4x4 Crew Cab 5.9 Cummins Diesel 6-speed Manual Transmission on 2040-cars

Auto blog

2018 Dodge Demon comes with a factory tune for race gas

We knew the Dodge Demon was going to make a lot of power, but the ongoing question has been how much. We've seen estimates of between 757 and 1,121, but those have simply been guesses based on the numbers found in promo photos. However, if we had to put our bets on a horsepower rating, we'll probably go with the higher estimates because the Demon can run on race gas. Yes, the latest teaser for the Demon reveals that it will come with a factory tune optimized for race gas, which is rated at 100 octane or higher. Running such high octane, in combination with its heavy-duty intake cooling, means the Demon can handle absurd amounts of boost and advanced timing without running the risk of dangerous pre-ignition or detonation. Of course this also means the Demon should be capable of astonishing power with the high-octane calibration. The tune will be included in the Demon crate on a separate engine computer that the owner can swap out when he or she is ready to race. In addition to the computer, the center stack also has a button to activate the high-octane mode. A pair of fuel pumps and larger injectors also ensure the engine gets plenty of that sweet racing fuel. When not running the high-octane tune, the Demon runs on your average premium gasoline. Also, in case you accidentally run premium gas with the high-octane mode activated, the car will automatically switch to the default tune if engine knock is detected. You can get a peek at the system in the video above, and be on the lookout for a bonus video tomorrow. The full reveal will be next week on April 11 at the New York auto show. Related Video:

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

The Dodge Demon's massive drag tires are just barely street legal

Despite the gaffe that was the Vin Dieselgate leak (no, not that one), Dodge and SRT are soldiering on with the twelve-part Dodge Demon rollout in the lead up to the car's reveal at the New York Auto Show. The Vin Diesel video showed what is almost assuredly the car's front, but now we get an official view of the Demon's rear in this week's video, "Wide Body." Along with the new view, Dodge shows off a cryptic license plate (Michigan #2576@35) and details on the Demon's tantalizing wheel and tire combo. That wheel and tire combo, meant to fill out the Demon's new wide wheel arches, is frankly impressive. Lightweight 18- by 11-inch wheels are wrapped in special Demon branded Nitto NT05R tires measuring an astounding 315/40R18 at all four corners. Not only does that trump the old Camaro Z/28's 305 section tires, it makes the Demon the first production car to come equipped from the factory with drag radials, claims Dodge. Presumably, the goal with the Demon is to provide enough power and grip to rotate the Earth underneath the car rather than propelling the car itself down a dragstrip. Beyond that, few other details were revealed. Dodge provided some vague information about how the "wide-body is laser clearanced, and the entire chassis is e-coated for durability before final assembly," but doesn't actually explain what that really means. We do know now that the flared fenders add 3.5 inches to the Demon's overall width. Overall, the car looks mean and purposeful, especially wrapped in just barely street-legal rubber. Follow along at www.ifyouknowyouknow.com and see if you can find and decipher all the hints. Related Video: Design/Style New York Auto Show Dodge Coupe Performance tires dodge demon dodge hellcat