2007 Dodge Ram 2500 4x4 5.9 Diesel Quad Cab Automatic Slt Short Bed Lifted on 2040-cars

Auto blog

Dodge Demon test mule spotted wearing unusual camouflage

The Dodge Demon apparently refuses to stay under wraps. The endless rollout of teasers continues each Thursday, but thanks to both Vin Diesel and our trusty spy photographer we have a whole suite of photos that show a nearly complete car in the flesh. This car appears to have been hiding in plain sight, as some of these photos were captured in the Detroit area. The car or cars in these photos is far less polished than the one shown in all of Dodge's teasers. The Air Grabber hood is unpainted, though it does come with some awesome hood pins. The same goes for the bolt-on fenders, as other pictures show a cleaner integration of the Demon's widebody modification. Despite the large Nitto logo on the top of the windshield, the cars in these photos are both wearing a set of Pirelli PZero All-season Plus tires on non-Demon wheels. It's as if drag radials aren't the best choice for winter driving. This car is fitted with two-piece Brembo brakes, but there's no telling if they're different than the standard Hellcat's. The decals on the side of the car may give clues to some of the Demon's equipment, but based on the LB Performance - commonly known as Liberty Walk- logo, the decals are likely more of a ruse than anything else. Liberty walk is famous in the tuning community for big, bolt-on body kits. The looks perfectly suit these test cars, though Borla exhaust and a Hurst shifter would be a wonderful addition to the Demon. Outside of that, there isn't much new to glean from these photos. Most of our questions about the Demon (horsepower, gearing, price) can't be had from pictures. Look for more news each Thursday in the lead up to the car's debut in New York in April. Related Video: Featured Gallery Dodge Demon Spy Shots View 14 Photos Related Gallery Dodge Demon Teasers View 17 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe dodge hellcat

Chrysler readying 20 Moparized vehicles for SEMA

The Las Vegas Convention Center has plenty of space for aftermarket companies and automakers to show off their wares, and it looks like Chrysler is taking advantage of the spacious floor plan. At next month's SEMA Show, Chrysler will have a full 20 cars from its six brands decked out with Mopar gear.
As a hint of what is to come, Chrysler released a handful of teaser sketches showing glimpses of modified Jeep Cherokee, Ram 1500, Fiat 500L and Chrysler 300 concept vehicles. The automaker will also use the venue to show off a new line of Jeep Performance Parts offered by the all-new Mopar Off-Road Division. In addition to the images, Chrysler also issued a brief press release - posted below - breaking down some of the "industry-first features" that Mopar has offered in recent years.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.