2006 Dodge Ram 2500 Quad Cab 4x4 Lone Star Cummins Diesel Tx Carfax Hwy Miles on 2040-cars

Auto blog

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

A car writer's year in new vehicles [w/video]

Christmas is only a week away. The New Year is just around the corner. As 2014 draws to a close, I'm not the only one taking stock of the year that's we're almost shut of. Depending on who you are or what you do, the end of the year can bring to mind tax bills, school semesters or scheduling dental appointments. For me, for the last eight or nine years, at least a small part of this transitory time is occupied with recalling the cars I've driven over the preceding 12 months. Since I started writing about and reviewing cars in 2006, I've done an uneven job of tracking every vehicle I've been in, each year. Last year I made a resolution to be better about it, and the result is a spreadsheet with model names, dates, notes and some basic facts and figures. Armed with this basic data and a yen for year-end stories, I figured it would be interesting to parse the figures and quantify my year in cars in a way I'd never done before. The results are, well, they're a little bizarre, honestly. And I think they'll affect how I approach this gig in 2015. {C} My tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015 it'll be as high as 73. Let me give you a tiny bit of background about how automotive journalists typically get cars to test. There are basically two pools of vehicles I drive on a regular basis: media fleet vehicles and those available on "first drive" programs. The latter group is pretty self-explanatory. Journalists are gathered in one location (sometimes local, sometimes far-flung) with a new model(s), there's usually a day of driving, then we report back to you with our impressions. Media fleet vehicles are different. These are distributed to publications and individual journalists far and wide, and the test period goes from a few days to a week or more. Whereas first drives almost always result in a piece of review content, fleet loans only sometimes do. Other times they serve to give context about brands, segments, technology and the like, to editors and writers. So, adding up the loans I've had out of the press fleet and things I've driven at events, my tally for the year is 68 cars, as of this writing. Before the calendar flips to 2015, it'll be as high as 73. At one of the buff books like Car and Driver or Motor Trend, reviewers might rotate through five cars a week, or more. I know that number sounds high, but as best I can tell, it's pretty average for the full-time professionals in this business.