2006 Dodge Ram 2500 Diesel 4x4 Mega Cab Slt 1 Texas Owner on 2040-cars

Auto blog

Dodge Challenger SRT Demon TransBrake eliminates the need for brake torquing

Performing the perfect launch is key to drag racing. In order to get consistent starts, the engineers behind the Dodge Demon developed TransBrake, a system that holds the output shaft of the automatic transmission to keep the vehicle stationary until launch. Rather than the traditional method of two-foot brake torquing, the system is triggered by pulling the shift paddle for quick and consistent launches. According to Dodge, the main benefit of TransBrake versus a two-foot setup is a quicker power delivery and higher engine launch torque potential. The system gives brake-free launches up to 2,350 RPM, a 105-percent increase in launch boost pressures, and a 120-percent increase in engine launch torque. Dodge also claims that using the paddle provides a 30-percent better reaction when compared to using your feet. In addition to shifting duties from your feet to your hands, the Demon's TransBrake will preload the driveline. Torque is loaded at the wheels, not the transmission. That means full torque delivery 150 milliseconds after the shift paddle is released. It should also help reduce the driveline shock that occurs when those 315 section rear tires get near-instant grip. The reveal is coming near. Continue checking out Autoblog and ifyouknowyouknow.com every Thursday until the New York Auto Show. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. New York Auto Show Dodge Coupe Performance drag racing dodge demon dodge hellcat drag strip

Fiat brand chief reassigned then resigns amid flagging sales

Jason Stoicevich was replaced as head of the Fiat brand in North America just the other day. He was immediately reassigned to another job within Fiat Chrysler Automobiles. But according to Automotive News, Stoicevich quit the new job – and the company altogether – the very next day. The development comes amidst flagging sales for the Fiat brand in America. The introduction of the awkward-looking 500L multi-purpose vehicle has been largely regarded as a sales disaster in the US. Despite having just introduced the new 500X into the growing crossover market, and an overall upward trend across FCA group sales, the Fiat brand's figures have been dropping all year. While the Italian brand's volume has fluctuated from month to month compared to last year's sales, the number of cars its dealers sells on an average day has been firmly in decline. Fiat's downward trend reflects a general tendency in the market towards larger vehicles at the expense of smaller ones. However, the powers that be in Auburn Hills evidently felt that a change of leadership was in order, so it placed Dodge chief Tim Kuniskis in charge of all the company's mass-market passenger-car brands – namely Dodge, Chrysler, and Fiat – and moved Stoicevich to running the group's fleet and small-business operations. Stoicevich remained in charge of the company's California Business Center, but it seems as though he was as dissatisfied with the switch as his superiors were with the performance of the brand over which he presided, and so he apparently elected to step down and leave the company.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat