2006 Dodge Ram 2500 5.9l Cummins Turbo Diesel 4x4 Longbed Pickup Truck 4wd 4dr on 2040-cars

Auto blog

Lee Iacocca's very first Dodge Viper RT/10 nets $285,500 at auction

The first 1992 Dodge Viper RT/10 to roll down the assembly line, which was snapped up by Chrysler chief Lee Iacocca, yesterday hammered at the Bonhams auction in Arizona for $285,500, more than double the pre-sale estimate. According to a history of the car published by the auction house, Iacocca, in his introduction of the Viper to the press, pointed to the car on stage and said, "This one right here is mine." That historic Viper, with serial number 001, has never been available on the open market, as Iacocca kept the car from new until he passed away last year. The car has been driven just 6,200 miles and was being sold by his estate. Other Lee Iacocca cars offered at the same sale fared less well. A 1986 Chrysler LeBaron Town & Country convertible — the ultimate expression of Iacocca's company-saving K-cars — with 20,500 miles on it sold for $19,040. That's less than the $20,000 to $25,000 the auction house had estimated the car would bring. A third car from the former auto executive's estate was a customized 2009 Ford Mustang. The pony car was one of a limited run of 45 Iacocca-branded custom Mustangs, which were reworked by Metalcrafters and sold by Galpin Ford in Los Angeles. The Iacocca Mustang, never titled and with 220 miles on it, hammered for $49,280. Related Video:     Featured Gallery Lee Iacocca's 1992 Dodge Viper RT/10 View 13 Photos Celebrities Chrysler Dodge Auctions Automotive History

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Dodge brings Charger Widebody 'concept' to Spring Fest

Last week we asked if an Instagram user had really seen a Dodge Charger Widebody cruising suburban Detroit. The answer is yes, he had. Dodge brought its Charger Widebody concept to Spring Fest 14, a celebration of everything built on Chrysler's LX platform. Note the use of the word "concept," and a Fiat Chrysler spokesperson telling journos, "We are taking a Charger design concept to Spring Fest to gauge feedback from the huge Dodge Charger, Challenger, and Chrysler 300 enthusiast base that attends the California event each year." Mark Trostle, head of design for Dodge and SRT, shared a few snaps of the Charger Widebody to Instagram. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Now ignore the word "concept." Of course a thing isn't done until it's done, but two years ago a thread on Charger Forums mused on a Photoshop of the sedan as a widebody. User ResumeSpeed chimed in to say, "Rear is not accurate as it's being revised. 2020 model year. Two Charger WB models: Hellcat and 392 Scat Pack." Fast forward to February of this year when Mopar Insider said its sources confirmed a thick-hipped Charger R/T Scat Pack and Hellcat with "drastically different looking front and rear fascias." Then, earlier this month, Allpar received a slide from what looks like an internal Dodge presentation explaining the "2020 Dodge Charger Hellcat Wide Body." The sedan in the slide looks almost exactly like the "concept." And now this. They even designed it with the Dodge Durango SRT grille treatment, which seems like a logical part of that 2020 revision. Giving the Charger a nip and tuck, a little more tire, and a $6,000 surcharge similar to the Challenger Widebody makes too much sense to merely toy with and then file away. Check out this video for a complete walkaround, and stay tuned.