2006 Dodge 2500hd H/o Cummins Diesel Laramie 4x4 Low Miles!! on 2040-cars

Auto blog

Junkyard Gem: 1976 Dodge D100, United States Army Edition

Members of the United States military have been driving Dodge trucks since the Army bought its first Dodge Brothers ambulance in 1917, and plenty of third-generation D-series pickups ended up in Army service during the mid-1970s. Most of these were 3/4-ton W200s and D200s (designated as M880s), but today's Junkyard Gem is a 1/2-ton D100 CARGO PICKUP W/CAB, found in a Denver self-service wrecking yard. Eventually, the Army auctions off old vehicles, and that happened to this battered D100 Custom at some point. This truck appears to have started life with Navy gray paint, which was painted over in Army-grade olive drab. Perhaps there was some vehicle-shuffling done by the Pentagon. The most recent layer of stickers shows that this truck's final military job was for the U.S. Army Recruiting Command. Power came from the legendary Chrysler Slant-6, in this case the 225-cubic-inch version rated at 105 horsepower. Like most fleet vehicles of the last 50 or so years, it has an automatic transmission. You couldn't expect every soldier to be able to work a three-pedal truck, not even way back in 1976. The Rust Monster has taken a few bites out of this truck, enough that its resale value converged with the current price of scrap vehicles. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Better price, mileage and payload than Ford or Chevy!

2020 Colorado Winter Driver's Notes | Behind the Wheel S02 // E12

2020 Mercedes-AMG GLC 63 I’ve had bad luck with SUVs this winter. Especially performance ones. First, I got a 2019 Range Rover Sport SVR delivered on summers right as two feet of snow fell, rendering it undriveable. Then, coronavirus cancelled Easter Jeep Safari as well as my trip out to Moab in the 2020 Jeep Wrangler Rubicon Diesel. Thankfully, when this 469 horsepower luxury mall crawler was dropped off, the sun shone down and the snow (mostly) held off.  The first thing that I noticed was there were a few blank buttons throughout the cabin, something that you may see in an entry model vehicle, but IÂ’m not accustomed to seeing in an AMG. Not a great look for a vehicle with an $80,000 price tag. Thankfully that was where the disappointment ended. As soon as you press the start button, the engine fires up and the exhaust note is incredible. Hopping on the highway ramp near my house, I floored it, and the biturbo V8 had me pressed back into the driver's seat, and this wasnÂ’t even the S version that our staff drove last year. Inside and out, the GLC 63 was everything youÂ’d expect from Mercedes. The interior was immaculate, and while the infotainment wheel and touch pad may take some getting used to for someone who isnÂ’t familiar, by now I have it down so that I can use it without looking. And while the V8 left me smiling ear to ear, I was most impressed by the amount of useable interior space there is. I happened to be moving at the time of this review and while all of my large furniture was shoved into the back of a moving van, I was able to fit almost everything else in the back of the GLC. 2019 and 2020 Fiat 500X Trekking ItÂ’s hard to say goodbye to an AMG and then turn around and be excited when a Fiat 500X pulls in your driveway (I know, I know, automotive journalist problems). That being said, when the red Fiat pulled up, I found myself admiring it. I am very familiar with the 500X. Back in 2016 Autoblog had one for a year as our long term test vehicle. I drove that car everywhere, multiple trips up north in Michigan, and even tracked it at Gingerman Raceway for a few laps before the brakes started smoking.  The 2019 model I had in my driveway and the 2020 model I drove in the snow up in the mountains feel very similar to that car. The interior is stylish and surprisingly roomy. The greenhouse is airy.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat