2004 Dodge Ram 2500 Slt Quad Cab Patriot Blue on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Hennessey Dodge Demon sets hellishly fast quarter-mile time

The Dodge Demon doesn't strike us as a muscle car much in need of a performance makeover. After all, this 840-horsepower MoPar machine's voracious quest for straight-line speed means it trims weight by jettisoning everything from a front passenger seat and rear seat, to its stereo and all carpeting in the trunk. The folks at Hennessey apparently think that's not nearly extreme enough. So, the Texas-based tuning outfit has turned the Demon into a 1,035-horsepower mega beast that runs a quarter-mile in 9.14 seconds at 152 mph. That's fast, really fast. In fact, the HPE1000 is now the world's fastest Dodge Demon, having set its record-setting pace at Lonestar Motorsports Park on May 8. "The 2018 Demon is a street-legal rocket from Dodge, but we wanted to take the car's impressive track times to an industry leading level." said president and company founder, John Hennessey. For comparison, the stock Dodge Demon is credited with running the quarter-mile in 9.65 seconds at 140 mph. The main HPE1000 modification involves replacing the stock 2.7-liter supercharger with one that's a staggering 4.5-liters in capacity. Also included in the Hennessey toy-chest are stainless steel long tube headers, a high-flow air induction system, upgraded throttle body, upgraded fuel pump and fuel injectors, along with custom engine management calibration. When all is said and done, the HPE1000 Dodge Demon delivers a total of 1,035 horsepower at 6,500 rpm and 948 pound-feet of torque at 4,200 rpm. While the standard Demon accelerates from 0-60 mph in only 2.3 seconds, the Hennessey variant trims this down to only 1.9 seconds. That's quick enough to make a Bugatti Chiron blush. Hennessey hasn't stated what all this will cost, though the company did say production of these devilishly fast Demons will be limited to only 50 examples. Customers also receive a 1-year/12,000-mile warranty, which seems a nice touch for a car that's downright scary with its performance specs. Related Video: Featured Gallery Dodge Demon Hennessey HPE1000 View 30 Photos Aftermarket Dodge Coupe Performance supercharger Hennessey dodge demon quarter mile demon

Dodge Hellcats change their stripes for 2016

If you've been on the fence about ordering up a new Dodge with Hellcat power, this might just provide the extra incentive you were looking for. Starting this month, Dodge is offering a new stripe option, exclusive to its most powerful muscle cars. The SRT Hellcat stripes are now available to order on the top-of-the-line, 707-horsepower versions of both the Charger and Challenger. The dual full-length stripes run all the way up from the front lip, over the grille, up the hood, accentuating the NACA duct, along the roof, down the trunklid, across the rear spoiler, and down the rear bumper. They feature a carbon-fiber texture, and can be ordered with any of eleven colors for an extra $995. Along with the stripes, Dodge has also announced that it is extending the availability of the exclusive Plum Crazy color – which was originally scheduled to expire at the end of December – for another month. The throwback hue can be ordered on Charger and Challenger models ranging from the SXT through the R/T models all the way up to the SRT 392 and Hellcat. 2016 CHALLENGER AND CHARGER SRT HELLCAT MODELS EARN EXCLUSIVE STRIPES, DODGE EXTENDS PLUM CRAZY PAINT - All-new SRT Hellcat dual exterior stripe design adds even more Dodge attitude to 2016 Challenger and Charger SRT Hellcat models - SRT Hellcat-exclusive dual full-length carbon-fiber pattern stripes provide a customized-from-the-factory look - Dealers will start taking orders for Hellcat stripes in January 2016 - SRT Hellcat dual stripes have a U.S. Manufacturer's Suggested Retail Price of $995 - Dodge is answering enthusiast demand for Plum Crazy exterior paint with an additional one-month run of the legendary and limited-edition high-impact hue January 8, 2016 , Auburn Hills, Mich. - For more than a year, Dodge Challenger and Charger SRT Hellcat models — the fastest and most powerful muscle cars ever with 707 supercharged HEMI® horsepower each — have stormed roadways and drag strips with acceleration blasts to 60 mph in the low 3-second range, generated more than 61 million sensational YouTube video views around the globe, enabled an entirely new generation of Dodge enthusiasts and now for 2016 have been rewarded with their very own Dodge performance stripes.