2001 Dodge 2500 Quad Cad 4x4 (lifted) $$no Reserve$$ on 2040-cars

Auto blog

Camaro driver clocked at 171 miles per hour

Chevy's 2016 Camaro SS is a fantastic piece of automotive engineering. It is also, apparently, very, very fast. This latter fact was perfectly illustrated when, on April 8, a Camaro SS driver was nailed in Two Harbors, Minnesota for doing 171 mph. According to WFAA, the unnamed speed demon was flying down Highway 61 near Two Harbors when Hermantown, MN Deputy Police Chief Shawn Padden clocked him at an eye-watering 171 mph. He then recorded the speeder at 168 and 141. At the time, Deputy Chief Padden was working with Minnesota State Patrol on an anti-DWI program called "Toward Zero Deaths". Padden, who was interviewed by the Duluth News Tribune, said he was surprised at the driver's sheer speed. "When he went by me, it was a blur," Padden told the News. "You get used to seeing people going 65 or 70 and what that looks like. But I've never seen anything like this. It's like a rocket on wheels." Fadden chased the Camaro down eventually, but it took some doing. To catch the Camaro, he pushed his Dodge Charger Pursuit to 135 mph just to get into range so the Camaro could see his emergency lights. The speeding driver was ticketed for careless driving, but may lose his license due to a Minnesota law that gives courts the option of revoking licenses for drivers caught doing more than 100 mph. News Source: WFAA, Duluth News Tribune Weird Car News Chevrolet Dodge Driving Safety Coupe Police/Emergency Performance Sedan camaro ss camaro

Dodge Charger Widebody is rumored on its way for 2020

Grab all the salt you have, save the amount you need for your recommended daily allowance. Mopar Insider reports its sources as having confirmed Dodge will unveil a Charger Widebody for the 2020 model year, in SRT Hellcat and R/T Scat Pack trims. Such a move would copy the trim and aesthetic formula used — to excellent affect — on the Dodge Challenger. The Charger widebodies would get also get unique suspension tuning, and the same 305/35 ZR 20 Pirellis as on the Challenger widebodies, but wrapped around unique, dual-five-spoke designs that are 11 inches wide. There has been talk of a widebody Charger for at least two years, many of those conversations carried out in the same way sleuths parse grainy photos of monsters. In April 2017, Instagram user gtpprix caught a standard Dodge Charger wearing Challenger widebody wheels, spaced so that the rubber extended beyond the fenders. A month later, a YouTube account in the name of Sinister Life caught the same car on video. The license plate doesn't appear to be from Michigan, which is where almost all Dodge prototypes get licensed. On the other hand, early spy shots of Challenger widebody prototypes from 2016 featured this same setup — a normal version with protruding tires. The SRT CEO at the time, Tim Kuniskis, joked about testing the Challenger widebody openly, knowing everyone would think it was a prototype Demon. According to Mopar Insider, engines and outputs won't change on the Charger widebody versions. That means sticking with the 485-horsepower, 6.4-liter V8 in the R/T Scat Pack, and the 717-hp, 6.2-liter V8 in the Charger Hellcat. Looks would change, however, with new front and rear fascias to differentiate the model and cohere with the new lines. That includes a new dual-snorkel hood grille and repositioned intakes, plus tweaked side sills. If it's really on the way, we should know this summer. Such a model would also support recent comments from Steve Beahm, head of Dodge, Fiat, and Chrysler brands, when Automobile asked about how the company will maintain any momentum in difficult days for sedans. Beahm said, "[Our] our job was to [ask,] 'How do we differentiate within the brands that are going to remain passenger-car brands?' ... What we do is we try to make our vehicles look different." Related Video:

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.