1995 Dodge Ram 2500 Base Extended Cab Pickup 2-door 5.9l on 2040-cars

Auto blog

Roadkill builds crazy-cheap 1968 Dodge Charger rat rod using an old motorhome

Certain requests for description simply cannot be fulfilled, like if someone asked you to describe Picasso's Guernica or Gilliam's Brazil. There is only one appropriate answer to such entreaties, and that is: "You just gotta see it." That's where we are with the latest episode of Roadkill, wherein Messr's Freiburger and Finnegan dig out a 1968 Dodge Charger that Freiburger acquired in exchange for a set of cylinder heads, and intend to stuff it with the big-block motor from a long-bed, three-quarter ton Dodge pickup.
Only the pickup is too nice to tear apart, and the Charger needs a whole lot more lovin' - and parts - than initially expected. Enter, stage right, the Class A Dodge Pace Arrow motorhome with a 440 big-block purchased for $1,000, and a retired Plymouth Fury from a previous episode.
What ensues over the course of the 40-minute installment is more cuttin', yankin', leakin', stallin', hammerin' and smokin' action than you've seen in a long time, and some techniques that would have made even Cooter wonder, "I'm not sure if we should do that." By the end, though, the payoff is good enough to make you think about perusing AutoTrader for a '68 Charger just to see if maybe...

Dodge recalls 173 Chargers and Challengers for front wheels that don't fit correctly

Dodge is recalling 173 Challengers and Chargers because they’re equipped with an incompatible front wheel and brake package. All the vehicles are 2019 model year cars built between May 28 and September 25 this year, according to the official NHTSA documents. The wheels donÂ’t provide enough clearance from suspension and brake components, Dodge says. ThereÂ’s a chance that the tireÂ’s inner sidewall will make contact with the steering knuckle. When the tire hits the steering knuckle, it could end up damaging the tire, causing a “sudden loss of tire air pressure.” This, of course, is not what you want out of a tire. Predictably, FCA says this could result in a crash without prior warning. To fix the problem, your local Dodge dealer will be installing the wheels that shouldÂ’ve been equipped on the car in the first place. FCA continues: “Also, for customer satisfaction, replace the rear wheels to match the front wheels.” We were wondering if the rear wheels would come into play here, and it looks like Dodge wonÂ’t be leaving anyone out to dry with mismatched front and rear wheels. The wheels in question are described as “Mid Gloss Black Wheel.” Check your window sticker (or wait for the official mailing) to see if you have those wheels on your Charger or Challenger. Unfortunately, FCA doesnÂ’t detail which trims of Charger and Challenger are affected in its recall notice. The company also makes it clear that this recall is due to “an engineering release error” and not a wheel defect. This particular wheel and brake package shouldÂ’ve never been offered as an option from the factory. Look out for a notice in early December, as FCA says it will begin notifying owners around December 13 this year. As of now, there are no reported injuries or accidents due to the issue.

Some dealers asking $100,000-plus for Daytona-edition Dodge Charger SRT Hellcats

If you thought the name of the 2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition was a lot to swallow, then you're definitely going to choke on what some dealers are asking for the privilege of owning one. The $4,495 package is commanding as much as $25,000 in "market adjustments" from stores looking to capitalize on the rarity of this extremely limited-edition model.  The folks over at Moparinsiders.com reported Friday that some dealers are asking Demon-level prices for their limited allocations of the commemorative package. Their assessment? Not worth it. We're inclined to agree.  The Daytona 50th Anniversary Edition package is, fundamentally at least, little more than a set of stickers, a dash plaque and a tiny bump in horsepower. What you really get for your money is exclusivity. Only 501 were built (to commemorate the number of production units required to homologate the original Charger Daytona for NASCAR racing); just 451 went to U.S. dealers. The other 50 were reserved for Canada.  To be fair, no variant of the 2020 Charger SRT Hellcat Widebody even approaches the definition of "inexpensive." Just to get behind the wheel of the newest edition to the Charger lineup will set you back at least $71,000. The Widebody package is more than just a set of custom fenders. The Hellcat also gets another 1.6 inches of track width and some extra rubber on the road. SRT engineers also increased the Hellcat’s front spring rate by 32% and beefed up its sway bars (from 19 mm to 21.7 mm in the front and from 32 mm to 34 mm in the rear). The adaptive suspension was firmed up a little bit across the board too for crisper response over road imperfections. Plus, you know, there's that 707-horsepower, supercharged, 6.2-liter engine. The Daytona gets an extra 10 ponies, right? Well, sort of, anyway. SRT rated its output at a slightly higher engine speed. Between us, it's the same thing.  So, there's a silver lining: You don't have to spend $100,000 for a 2020 Charger Widebody Hellcat if you don't want to, but somebody probably will.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.