Lone Star Hemi Nerf Bars Bed Cover & Liner Cd Alloy Wheels Power Seat Cruise on 2040-cars

Auto blog

2020 Dodge Challenger Drag Pak will debut at SEMA

Mopar fans have countless reasons to get hyped about the 2019 SEMA show. Speedkore is bringing a twin-turbocharged, all-wheel-drive Dodge Charger Hellcat Widebody, Mopar is bringing a done-up 1968 Dodge D200 "Lowliner," Ram is bringing a diesel 1500 overlander, and Jeep is bringing a custom off-road Wrangler. But the launch of the new 2020 Dodge Challenger Drag Pak might garner the most attention from the brand's most serious customers. Prior to the show, Mopar teased a photo and a short video clip, both showing a new Dodge Challenger from the overhead view. The white Challenger showed a wide blue stripe down the center of the car with two pinstripes along each side. "Powered by SRT" runs across the top of the windshield, and Mopar logos grace both sides of the car just beneath the side windows. Red decals run back from the rear quarter panels and connect across the rear of the car. It also has hood pins on the SRT Hellcat hood and a parachute attached the rear. There's a parachute because this is the factory turnkey drag-race-focused Dodge Challenger racecar. Mopar released no other information on what type of hardware the Drag Pak will be using, or what's under the hood, but the video gives a great preview of the exhaust note in full tire-smoke mode. As some Drag Paks in the past have dropped roughly 1,000 pounds from their production starter vehicles, the 2020 model will surely utilize plenty of weight-savings methods such as the removal of all interior comfort features that don't apply on the racetrack. Mopar has also previously altered the position of the engine and changed the wheelbase to the benefit of better weight distribution. Mopar is set to livestream the unveiling starting at 7:26 p.m. ET (that's 4:26 on the West Coast, which not coincidentally coincides the the displacement of the vintage 426 Hemi engine) on Nov. 5, 2019. Until then, check out the 2009, 2010, 2011, or 2016 Drag Paks.

Junkyard Gem: 1964 Dodge Dart station wagon

The Chrysler A Platform, built from the 1960 through 1976 model years for the North American market (and for a few years beyond that in Australia and Latin America), was one of Chrysler's greatest hits, if not the greatest hit. We know these cars best as the 1963-1976 Dodge Dart and the 1960-1976 Plymouth Valiant, and they established a reputation for reliability matched only by the likes of the Mercedes-Benz W123 diesel. I still see many of these cars during my junkyard wanderings, but A-Body wagons have become very rare. Here's a tattered '64 Dart wagon that I spotted in a self-service wrecking yard in San Jose, California. 1964 was the first model year for factory-installed V8 engines in the Dart and Valiant (and the Valiant's sporty sibling, the Barracuda), and the 273-cubic-inch pushrod V8 was a sturdy powerplant indeed. The slant-6 engine, though less powerful, went into most of these cars, and for good reason: It was harder to kill than all the world's cockroaches and rats put together. This car would have come with a 170- or 225-cubic-inch version of the slant-6, optimistically rated at either 101 or 145 gross horsepower (probably about 55 horses at the wheels), but I didn't feel like scraping sludge off casting numbers to see if it's on its first or 11th engine. In any case, slant-6 Darts were on the pokey side but would get you to your destination every time. This one has a lot of rust for a California car (in New Hampshire or Wisconsin, it would be considered pretty solid) and the interior is more or less obliterated, so even dedicated station-wagon lovers wouldn't have been motivated to take it on as a restoration project. So another early Dart is poised to be stuffed into The Crusher, for reasons that make good economic sense. This still makes us sad, though. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Here's the compact you've been waiting for!

The final-year Viper special editions sold out so fast Dodge is adding more

Viper collectors don't mess around. After Dodge opened ordering for its 25th anniversary 2017 Viper models – some of the last ones that will be built – all of the cars were spoken for in just five days. The company managed to sell 206 cars, an average of about 41 per day. Compare that to the 241 Vipers sold through May of this year and you can see why special editions make good business sense. Demand was so strong that Dodge will add a sixth special-edition for the Viper's last year of production. Within the group of five initial special packages, the winner was the 1:28 Edition ACR; all 28 went in 40 minutes. Dodge sold the 31 VooDoo II Edition ACRs in two hours, while 25 Snakeskin Edition GTCs and 100 GTS-R Commemorative Edition ACRs took two days to sell out. The 22 Dodge Dealer Edition ACRs took five days – apparently the dealers were too busy taking orders for the other 184 cars they didn't have time to order their own. The additional anniversary car is called the Snakeskin ACR. Dodge will build "up to" 31 of them, which we're pretty sure means exactly 31 if the previous demand is any indicator. The count matches the 2010 run of Snakeskin ACRs and will take the final-edition total to 237. We don't have any photos of that one yet, but you can get a good idea of what it will look like from the Snakeskin GTC. This one features Snakeskin Green paint, obviously, with a custom snakeskin-patterned SRT stripe, the ACR Package, the Extreme Aero Package, carbon-ceramic brakes, the ACR interior, a serialized Snakeskin badge on the instrument panel, and a custom car cover with the owner's name by the door. It will be available to order in the middle of this month, which means it will be sold out well by the end of the month. Chances are these and many of the others will go to mega-collectors like Wayne and D'Ann Rauh of Texas, who, at last count, owned 79 Vipers. Seventy-nine. Like we said, Viper collectors don't mess around. Related Video: