Dodge Ram 1500 2011- 8-cylinder Flex Fuel, 4.7l V8 Ffv-5 Speed Auto Transmition on 2040-cars

Auto blog

Cars.com runs 11-second quarter with Dodge Charger Hellcat

The Dodge Charger SRT Hellcat and its Challenger sibling are two of the heroes of the modern performance world. With a headline-grabbing 707 horsepower from a supercharged 6.2-liter V8, their output even shames many supercars. But how quick can one really cover a quarter mile? Cars.com recently decided to find out by taking a Charger Hellcat to the drag strip to see if the sedan lived up to Dodge's 11-second claims. The results were quite impressive. After 13 quarter-mile runs of adjusting variables like the tire pressures and the car's various electronic aids, the Charger Hellcat managed a pass in 11.03 seconds at 126.61 mph – the pinnacle result of the day. This car was mechanically stock and wore the optional Pirelli P Zero tires. According to Cars.com, other quick sprints reached 11.09 seconds and 11.1 seconds, which even beat the site's 11.41-second best from a Challenger Hellcat last year. Getting the Hellcat's prodigious power down without losing traction was a challenge, even on the summer tires. Cars.com thought it had a run that could have dropped below 11 seconds, but then the wheels spun. Using the factory-recommended pressures, the Charger Hellcat was no still slouch with an 11.27-second time recorded, but taking things down to 25 psi proved the quickest at the strip. We already knew that the Charger Hellcat was a wonderful vehicle for eating up huge gulps of asphalt at high speeds and could verify its 204-mile-per-hour top speed (quite a bit faster, incidentally, than the Ferrari California T's 196 mph top-speed). Apparently, the 11-second quarter-mile claim is just as accurate. Also, for any curious owners, the Cars.com story divulges many of the tweaks required to reach this seriously quick time. Related Video:

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.