Built V8 4bbl Hrst 4sp 68 Roadrunner Tran Duals Harley Orange/black Nw Whls 2012 on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Hennessey Dodge Demon sets hellishly fast quarter-mile time

The Dodge Demon doesn't strike us as a muscle car much in need of a performance makeover. After all, this 840-horsepower MoPar machine's voracious quest for straight-line speed means it trims weight by jettisoning everything from a front passenger seat and rear seat, to its stereo and all carpeting in the trunk. The folks at Hennessey apparently think that's not nearly extreme enough. So, the Texas-based tuning outfit has turned the Demon into a 1,035-horsepower mega beast that runs a quarter-mile in 9.14 seconds at 152 mph. That's fast, really fast. In fact, the HPE1000 is now the world's fastest Dodge Demon, having set its record-setting pace at Lonestar Motorsports Park on May 8. "The 2018 Demon is a street-legal rocket from Dodge, but we wanted to take the car's impressive track times to an industry leading level." said president and company founder, John Hennessey. For comparison, the stock Dodge Demon is credited with running the quarter-mile in 9.65 seconds at 140 mph. The main HPE1000 modification involves replacing the stock 2.7-liter supercharger with one that's a staggering 4.5-liters in capacity. Also included in the Hennessey toy-chest are stainless steel long tube headers, a high-flow air induction system, upgraded throttle body, upgraded fuel pump and fuel injectors, along with custom engine management calibration. When all is said and done, the HPE1000 Dodge Demon delivers a total of 1,035 horsepower at 6,500 rpm and 948 pound-feet of torque at 4,200 rpm. While the standard Demon accelerates from 0-60 mph in only 2.3 seconds, the Hennessey variant trims this down to only 1.9 seconds. That's quick enough to make a Bugatti Chiron blush. Hennessey hasn't stated what all this will cost, though the company did say production of these devilishly fast Demons will be limited to only 50 examples. Customers also receive a 1-year/12,000-mile warranty, which seems a nice touch for a car that's downright scary with its performance specs. Related Video: Featured Gallery Dodge Demon Hennessey HPE1000 View 30 Photos Aftermarket Dodge Coupe Performance supercharger Hennessey dodge demon quarter mile demon

Ward's announces 10 Best Engines 2015

Ward's Auto has named its 10 Best Engines for 2015, covering a range of powerplants from fuel-sippers to fire-breathers. As with past years, forced-induction reigns supreme, with seven of the ten engines featuring a turbo or supercharger. This year is slightly different, though, as two of the seven blown engines are turbocharged three-cylinder mills, from the Ford Fiesta and Mini Cooper. They're joined by the 2.0-liter turbo four from the Volvo S60, the 1.8-liter turbo four from the Volkswagen Jetta and the 2.0-liter boxer from the Subaru WRX. BMW and Chrysler were the only marques to be named to this year's list twice, with the electric motor from the i3 joining the Mini's three-pot, and the 3.0-liter turbodiesel V6 in the Ram 1500 and Jeep Grand Cherokee repping the diesel crowd, alongside a certain supercharged monster. Hyundai also took a prize with a zero-emissions powertrain, with the Tucson FCV's 100-kilowatt fuel cell making the list (apparently Ward's is quite generous with what it deems an "engine"). Rounding out the list are two Autoblog favorites, each displacing 6.2 liters, but producing their power very differently. On the one hand, Chevrolet's overhead-valve, 455-horsepower V8, found in the Corvette, makes its power the old fashioned way. And in the other corner, we have one of the most exciting engines of the year – the 707-hp, 6.2-liter, supercharged Hellcat V8, featured so prominently in the Dodge Challenger and Charger SRT Hellcat. "We spend a lot of time reading the powertrain tea leaves throughout the auto industry, and we're proud that this year's list is a microcosm of all the latest innovation coming from automakers," said Ward's Editor-in-Chief Drew Winter in a statement. "It's not just a list for enthusiasts or for environmentalists," he says. "There's something for every vehicle shopper and every budget. All the powertrains on this list deliver a first-rate driving experience," Winter added. Scroll down for the full list from Ward's, and let us know which engines you think belong and which should have been included in this year's rankings. Ward's 10 Best Engines of 2015 Announced by Penton's WardsAuto Honorees span most diverse and technically advanced engines in 21 years of recognized powertrain excellence SOUTHFIELD, Mich., Dec. 10, 2014 /PRNewswire/ -- Penton's Wards 10 Best Engines of 2015 have been announced.