Big Horn 5.7l Cd 4x4 Power Steering Abs 4-wheel Disc Brakes Automatic Headlights on 2040-cars

Auto blog

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?

Dodge reveals a few of the goodies in the Demon crate

One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.