2012 Dodge Ram Express Hemi 4x4 Lifted 6-pass 20's 13k Texas Direct Auto on 2040-cars

Auto blog

Driving the 2019 Dodge Durango Pursuit | Bells and whistles, lights and sirens

Recently, we went to the FCA proving grounds in Chelsea, Mich., to test out the company's 2019 model-year lineup. There are a lot of cars to choose from, and only a limited time to drive them, so since we couldn't drive the Dodge Challenger SRT Hellcat Redeye (that drive is coming soon, though) naturally we gravitated to the flashiest, noisiest one: the 2019 Dodge Durango Pursuit police vehicle. This is the first time the Durango is being offered as a cop car, and there are a number of features that make it fit for service. All Durango Pursuit models feature all-wheel drive, and it's available with two different engines. The standard motor is the 3.6-liter Pentastar V6, providing 293 horsepower and 260 pound-feet of torque. The tester we got to drive, though, was equipped with the 5.7-liter hemi V8, good for 360 horsepower and 390 pound-feet of torque. It also has a load-leveling performance suspension, which really helped out when we tossed it around the handling course. It has 8.1 inches of ground clearance, which means it can get to scenes off the beaten path. As much as we loved driving it, we had the most fun just playing with the lights and sirens of the Durango Pursuit. Standing outside the vehicle, the sirens and horn are incredibly loud, enough to make bystanders jump in fright. Dodge did a good job with the sound deadening, though, and the sustained wail wasn't bothersome when chasing imaginary suspects around the test track. One feature we didn't get to test out, but important to police duty, was the special Uconnect system in the Durango Pursuit. More than just an infotainment system, the seven-inch display is equipped to integrate various law enforcement systems. Another cool detail about the car, its tri-zone climate system is ideal for K9 units, with the ability to set separate HVAC settings for the dogs in the back of the car. Check out the video above, and stay tuned for more videos to come from our time spent at FCA's Chelsea proving grounds. Related Video: Dodge Crossover SUV Police/Emergency Special and Limited Editions Videos FCA

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Junkyard Gem: 1987 Dodge Ram 50

Chrysler began selling Dodge-badged Mitsubishis way back in the 1971 model year, when the Mitsubishi Colt Galant became known here as the Dodge Colt. Later in the decade, a Plymouth Arrow-badged version of the Mitsubishi Triton small pickup appeared here, along with a Dodge version known as the D-50 and — a few years later — the Ram 50. Once Mitsubishi began selling the same trucks here as Mighty Maxes, starting in the 1983 model year, the Ram 50 didn't seem quite so specialÂ… and then the Dakota made its debut for the 1987 model year. Still, when the Triton went to its second generation that same year, Chrysler continued selling it as the Ram 50. Here's one of those second-generation trucks, found in a Denver-area self-service yard last month. At this point, GM had long since stopped selling Isuzu Fasters with Chevrolet LUV emblems, as had Ford with the Courier-badged Mazda Proceed (after developing the all-American S-10 and Ranger, respectively). The decision-makers at Chrysler, however, calculated that the Ram 50 could grab some sales from Dodge truck shoppers who felt that the Dakota was too big for their needs; as a result, the Ram 50 stayed on sale here through 1994. The last Mighty Maxes rolled out of American Mitsubishi showrooms in 1996. The 6G72 V6 engine became available in four-wheel-drive Ram 50s a few years after this truck was built, but in 1987 all Ram 50s came with either the 2.0-liter 4G63 Sirius or 2.6-liter Astron four-banger. This truck has the base Sirius, rated at 92 horsepower. Remember when new trucks came with double-digit horsepower ratings? Most American-market small pickups still had manual transmissions during the middle 1980s, though that would change in a hurry with the dawn of the 1990s and the drop in slushbox prices. This one has the base five-speed. Just barely 100,000 miles on the clock, very unusual for a junkyard pickup of this age (especially one with a thick coat of brush-applied white house paint on the tailgate). Maybe the speedometer cable broke 25 years ago. You don't see many rear-wheel-drive pickups with roll bars. You'll find one in every car. You'll see. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Dodge Ram 50 Commercial 1987 Those other Japanese imports hallucinated the Ram 50 in alarming ways. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.