2011 Dodge Ram 1500 St on 2040-cars

Auto blog

2015 Dodge Viper price drops $15k for 2015

We recently saw updated specs and new trims of the 2015 Viper, but it looks like the folks at Dodge were saving the biggest surprise for last. Prices on all levels of the American sports car are seeing an immediate, across-the-board price cut of $15,000; even 2014 models still remaining on dealer lots.
The new MSRP for the 2015 Viper in its base SRT trim now starts at $84,995, and when the TA and GTS come to the lineup later next year, they start at $100,995 and $107,995, respectively. The move seems like a swing for the fences that might help to quell slow sales.
Obviously, current Viper owners might be somewhat peeved that their investment was just re-priced by the company. However, to assuage some of their concerns, Dodge is giving all fifth-gen owners a certificate worth $15,000 towards the purchase of a new one, which comes in addition to the price reduction.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

2015 Dodge Viper GTC available in 25 million no-cost combos with 1 Of 1 bespoke program

What's the one thing no car can have too much of? Here's a hint – it's not power. It's not efficiency, either, or technology, or even safety. It's exclusivity. It's one reason Rolls-Royce has become a legend building absolutely bespoke motor vehicles, and it's the reason Dodge, of all companies, is offering a new GTC trim level for its Viper supercar. Now, you might be asking what's so special and exclusive about a trim level? Well, in the Viper GTC's case, it gives owners access to a catalog of 8,000 shades of paint for the exterior, 24,000 "hand-painted" custom stripe patterns, 10 different wheel options, 16 interior trims and no fewer than six aerodynamic packages. That results in 25 million different configurations for the 645-horsepower snake. Most shockingly, the customization choices come at no additional cost on the GTC model. And it's only the start. Ordering a GTC will enroll customers in a unique VIP program called Viper Concierge, which according to Dodge, "offers an exclusive point of contact throughout the custom Viper build process." In other words, buyers will be given the means to stay right on top of their car's production, through the 140-to-160-hour painting process, which itself will be fully documented with pictures and through a mobile-friendly website, to the actual construction of their GTC. The Concierge process will start with the ordering stage, which will include Dodge sending customers a paint chip showing the owner's custom choosing, which they can confirm or refuse. Shortly thereafter, Dodge will send buyers a 1:18-scale "speed-form" replica in their chosen custom colors, once again to confirm or deny the build. Once the buyer's color and option selection is locked-in, that car becomes a one-of-one Viper for that year – no other buyer will be permitted to build a Viper to the same specifications. The concierge service also grants access to the Viper Ambassador Owner's Portal, where orderers can track their car's build process, receive weekly updates and share their excitement with (jealous) friends and family. And once the car is complete, it will be fitted with a custom dash plaque identifying its bespoke provenance – the owner can choose to have their name put on the badge, the car's nickname, or whatever they wish (Dodge will also ship each Viper with a second blank plate to include if the original owner sells the car).