2011 Dodge Ram 1500 Slt on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Made in America | These cars top the most-American list

The car with the most American/Canadian content for 2022 is ... cue the drumroll ... the Lincoln Corsair, in both standard gasoline-fueled and plug-in hybrid guise. Both versions of Lincoln's compact luxury crossover earned a score of 86 — due to 72% of its parts coming from one of the two aforementioned countries — in the American University Kogod Business School's annual "Made in America Auto Index." Last year's leader, the 2021 Ford Mustang GT (when equipped with a manual transmission) fell all the way to 22nd place with a 50% rating due to a switch in transmissions sourced from Mexico. In case you're interested, that puts Ford's red-blooded American ponycar below vehicles like the Kia Sorento, Mercedes-Benz GLE-Class SUV and Lexus ES. If you're wondering how an American car that's assembled within the borders of the United States could rank below a model from a Korean, German or Japanese automaker, well, we'll let Kogod explain: "The components of the index are based on research performed by the Center for Automotive Research in Ann Arbor Michigan regarding the economic value of different components of auto manufacturing. For example, the highest ranked cars are made by U.S.-based manufacturers using American engines and transmissions, and with a high AALA percentage of U.S. and Canadian parts." There are 25 total vehicles listed in the Top 10 (there are lots of ties this year). Here's the full list: (1) Lincoln Corsair: 86 (1) Lincoln Corsair PHEV: 86 (2) Tesla Model 3 Long Range: 82.5 (3) Chevrolet Corvette Sting Ray: 81 (4) Chevrolet Colorado: 80.5 (5) Jeep Cherokee Latitude 4x4: 80 (5) Jeep Cherokee Trailhawk: 80 (5) Tesla Model 3 Performance: 80 (5) Tesla Model Y: 80 (6) Dodge Durango Citadel: 79.5 (6) Dodge Durango Blacktop AWD: 79.5 (7) Honda Passport Trailsport: 78.5 (8) Ford F-150 2.7L, 3.3L, 5.0L: 77.5 (8) Ford Ranger: 77.5 (8) Ford Bronco automatic: 77.5 (8) Tesla Model S: 77.5 (8) Tesla Model X: 77.5 (9) Jeep Grand Cherokee Laredo 3.6L: 77 (9) Jeep Grand Cherokee L LTD: 77 (9) Jeep Grand Cherokee Overland 3.6L: 77 (9) Chevrolet Camaro automatic: 77 (10) Honda Odyssey: 76 (10) Honda Ridgeline: 76 (10) Honda Pilot: 76 There's a whole long list of reasons for the above scores, with seven criteria that include factory location, headquarters location and where its various bits and pieces come from.

Dodge designer on yellow plastic splitter guards: 'I wish they would take them off'

About a year ago, Dodge began placing yellow strips of plastic on the leading edge of Charger and Challenger front splitters to prevent damage during transport from plant to dealer. Dodge embossed "To Be Removed By Dealer" into the plastic, but those instructions weren't always followed. By summer of 2018, so many owners had left the tabs on, or reinstalled a discarded set, or bought a set on eBay for $100 or more, that factions broke out. Some thought the protectors looked cool, some thought they looked foolish, some thought it didn't matter either way. Now Dodge and SRT lead designer Mark Trostle has stepped in with his thoughts, those being, "I wish they would take them off."  Trostle made the remarks at the end of a video by Canadian auto scribe Brian Makse that otherwise dove into the design and technology on the 2010 Charger Widebody. Part of the designer's remarks related to aesthetic aspects — designers are paid to be precious about every line they draw, after all. "When we did the sketch for the Charger and Challenger," he said, "it never had yellow strips on it," and, "To me, as a designer, it ruins the lines of the car." He had a functional reason as well, though: "You're just ruining the paint!" The paint issue convinced Tyler Grant, the Internet sales manager at a Dodge dealer, to make a Facebook post in April this year requesting owners remove the splitter guards. Grant wrote that because the guards aren't specifically molded to fit perfectly, dirt and moisture get between the plastic and the splitter and mar the clear coat or paint, illustrated by a scuffed example that had been driven just 18 miles with the protectors on. He ended with, "Please, on behalf of your splitter AND its paint, take off the splitter guards." Despite forum chatter, splitter-shaming Facebook photos, and Facebook groups like "Hey Pal, You Forgot to Take Your Splitter Guards Off," it appears too late for the protector color to curb (get it?) the trend. Owners have already dealt with the dirt issue by putting protective tape on the air dam, others have painted the spilitter guards to match the car, and the owner of a vintage Dodge pickup ran yellow tape across the width of his front bumper in an attempt to join the party.  In the Makse video, Trostle said that the automaker would soon be rolling out a "new fashionable purple color" for the protectors. "We'll see if that one takes off," he said. "I hope it doesn't."