2010 Dodge Ram 1500 Extended Cab Slt 4x4 - Truck - Lifted on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Dodge Journey gets more SUV-like look with new Crossroad model

Looking to play up its aging three-row crossover, Dodge will introduce a new model for its Journey franchise at next week's Chicago Auto Show. The 2014 Dodge Journey Crossroad will be a new trim level positioned between the SXT and Limited, and it will be distinguished from other Journey models thanks to a handful of styling add-ons.
Plucking a page right out of the appearance playbook of the Ford Explorer Sport, the Journey Crossroad gets a meaner, more SUV-like demeanor. The Journey has often straddled the line between tall wagon and crossover, but this new trim goes a long way toward skewing its visuals toward the utility vehicle end of the spectrum. That's thanks largely to the Platinum chrome exterior trim on its roof rails and side sills, unique fascias, smoked headlights and taillights and, of course, those black 19-inch wheels. Inside, the Journey Crossroad will get a similar treatment, with darker, Liquid Graphite accents throughout the cabin, and the model will also come standard with leather seats (which Dodge says are a new design), and Chrysler's giant 8.4-inch Uconnect screen.
The 2014 Journey Crossroad goes on sale this spring with a starting price of $24,995 (*not including $995 for destination) for the four-cylinder, front-wheel-drive model, but Dodge says that the model will also be offered with more power and capability from the optional 3.6-liter Pentastar V6 and all-wheel-drive. Scroll down for the full press release, and check back next week for our live coverage from Chicago.

2015 Dodge Viper GTC available in 25 million no-cost combos with 1 Of 1 bespoke program

What's the one thing no car can have too much of? Here's a hint – it's not power. It's not efficiency, either, or technology, or even safety. It's exclusivity. It's one reason Rolls-Royce has become a legend building absolutely bespoke motor vehicles, and it's the reason Dodge, of all companies, is offering a new GTC trim level for its Viper supercar. Now, you might be asking what's so special and exclusive about a trim level? Well, in the Viper GTC's case, it gives owners access to a catalog of 8,000 shades of paint for the exterior, 24,000 "hand-painted" custom stripe patterns, 10 different wheel options, 16 interior trims and no fewer than six aerodynamic packages. That results in 25 million different configurations for the 645-horsepower snake. Most shockingly, the customization choices come at no additional cost on the GTC model. And it's only the start. Ordering a GTC will enroll customers in a unique VIP program called Viper Concierge, which according to Dodge, "offers an exclusive point of contact throughout the custom Viper build process." In other words, buyers will be given the means to stay right on top of their car's production, through the 140-to-160-hour painting process, which itself will be fully documented with pictures and through a mobile-friendly website, to the actual construction of their GTC. The Concierge process will start with the ordering stage, which will include Dodge sending customers a paint chip showing the owner's custom choosing, which they can confirm or refuse. Shortly thereafter, Dodge will send buyers a 1:18-scale "speed-form" replica in their chosen custom colors, once again to confirm or deny the build. Once the buyer's color and option selection is locked-in, that car becomes a one-of-one Viper for that year – no other buyer will be permitted to build a Viper to the same specifications. The concierge service also grants access to the Viper Ambassador Owner's Portal, where orderers can track their car's build process, receive weekly updates and share their excitement with (jealous) friends and family. And once the car is complete, it will be fitted with a custom dash plaque identifying its bespoke provenance – the owner can choose to have their name put on the badge, the car's nickname, or whatever they wish (Dodge will also ship each Viper with a second blank plate to include if the original owner sells the car).