2010 Crew Cab 4.7l V8 Tan Cloth Keyless Entry Bedliner Alloys One Owner 71k on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Trump tells Detroit 3 CEOs he wants more US jobs, calls environmentalists 'out of control'

As expected, President Donald J. Trump met with top executives from FCA, Ford, and General Motors this morning as part of a larger push to generate jobs in America. "I want new plants to be built here for cars sold here!", Trump said in a tweet ahead of the meeting. Not everything said in the meeting was made public, but the President later tweeted that he had a "Great meeting with automobile industry leaders." FCA CEO Sergio Marchionne, Ford chief Mark Fields, and GM's Mary Barra all echoed the positive vibes after the meeting. In a statement, Barra called the discussion "very constructive and wide-ranging," adding that it focused on "policies that support a strong and competitive economy and auto industry," and "that supports the environment and safety." That's noteworthy, because Trump is reported to have said "I am to a large extent an environmentalist. I believe in it, but it's out of control." Fields, speaking to reporters after the meeting, said, "We're excited about working together with the president and his administration on tax policies, on regulation and on trade to really create a renaissance in American manufacturing." The Ford CEO was specifically talking about Trump's withdraw from the Trans-Pacific Partnership. "We've repeatedly said that the mother of all trade barriers is currency manipulation, and TPP failed in meaningfully dealing with that, and we appreciate the president's courage to walk away from a bad trade deal," he said. Marchionne focused on American manufacturing in his statement after the meeting. "I appreciate the President's focus on making the US a great place to do business. We look forward to working with President Trump and members of Congress to strengthen American manufacturing." Perhaps equally as interesting as what was said and who was invited are what wasn't said and who wasn't invited. Trump has been very vocal about his distaste for US automakers' plants in Mexico, but no mention was made of the North American Free Trade Agreement by Trump or any of the Detroit CEOs after the meeting. We also have to wonder if Trump plans to meet with representatives from German, Japanese, and Korean automakers that have made massive investments into American plants and produce a large number of cars in this country. Related Video: News Source: Reuters, General Motors, Fiat Chrysler Automotive, Donald J.

2018 Dodge Challenger GT Drivers' Notes Review | The right car for the season

Associate Editor Joel Stocksdale: Dodge uses the Challenger GT trim to denote its V6 all-wheel-drive model, but it seems apt for reasons besides that. The Challenger, even with a V6, is an excellent, affordable American grand tourer. It's still extremely stylish, despite barely changing looks since Dodge introduced it for the 2008 model year. The solid gray on this one was particularly attractive. It also seemed appropriate considering the Challenger's battleship size. This thing is truly massive. That's beneficial in the sense that it has an enormous trunk (perfect for touring), but not so much for maneuvering. But thankfully, it's easy to spot the corners, which helps a lot. The Challenger GT is a pretty able handler, too. It feels composed in corners, not too heavy, only mild body roll, and steering that weights up very naturally. The ride is relatively comfortable. It takes the edge off of most pavement imperfections, but you feel more than you might expect. So the Dodge Challenger GT has the style, space, and a decent balance of sportiness and comfort — which just leaves one thing left to address, the powertrain. And as it turns out, the V6 actually works quite nicely in the big Dodge. Under full throttle, you get an angry, throaty honk from the intake that, while not as smooth and classic as a V8, is still fairly satisfying. It also has more than adequate acceleration, if not exhilarating. It's a combo that makes not only a fun affordable GT car, but just a solid commuter with an extra dose of style. The only caveat is that if you need something more truly sporty, you may still want to look at a Camaro or Mustang. Associate Editor Reese Counts: I spent the latter half of last week in Idaho and Wyoming driving a pretty sweet Nissan 370Z in the snow. That car was equipped with tracks and skis and allowed me to do some pretty dumb things with few repercussions, though it was one of the loudest and most uncomfortable cars I've ever driven. Coming home to Detroit and a Destroyer Grey Challenger GT was a very nice change of pace. The thing is, this car is still plenty capable in the snow. I like the Challenger quite a bit, especially in the bonkers Hellcat and Demon guise. But not everyone needs a 700-plus horsepower brute that guzzles gas with a nearly unequalled thirst. The Challenger GT checks a lot of boxes. It looks good, it's comfortable, roomy and thanks to all-wheel drive, genuinely usable year round.