2007 Dodge Ram 1500 St Crew Cab Pickup 4-door 3.7l on 2040-cars

Auto blog

Hellephant 1,000-horsepower Mopar crate engine priced, is available to order

The folks at Fiat Chrysler's Mopar division unveiled its meanest road-going V8 ever at last year's SEMA show. It makes 1,000 horsepower, and it's called the Hellephant in honor of the second-generation Charger's 426 "Elephant" V8, and because it has a honking big supercharger on top like the modern Hellcat. What we didn't know was the price, but now order books are open, and it's priced at $29,995. That's about $10,000 more than the currently available Hellcat engine, which makes 707 horsepower. You'll also probably want to buy the available kit that comes with all the computers, wiring, sensors and throttle to run it, and that's an extra $2,265. Putting things further into perspective, you can actually buy an entire new Dodge Challenger SXT V6 for $29,340. You'll also still need to add other accessories if you want things like air conditioning, which Mopar is also happy to sell you. What we're saying is, this is a lot of money just for an engine. But on the other hand, this is a roughly plug-and-play engine with Bugatti Veyron power for the price of a V6 Challenger, so that's pretty awesome. And you can put it into anything you have the skills or money to put it in. Plus, it should be able to make more power with higher-octane fuel. We can't wait to see the swaps and builds.

Jay Leno's 426-powered 1966 Dodge Coronet 500 is simple and simply fun

This week on Jay Leno's Garage, the man in denim presents one of his most subdued-looking cars, a 1966 Dodge Coronet 500. Despite that, it's one of his favorites. As he shows, the car is nearly free of any unnecessary options, excepting bucket seats and a console shifter. At least those are the only visible options, since the original owner also opted for the massive 426 cu. in. Hemi V8. What Leno really likes about the car is the honking huge V8 combined with the car's simplicity, especially the lack of frivolities like scoops, stripes, and wings. It's finished in a low-key, dark metallic green, and has plain-Jane "dog dish" wheel covers. The one downside to the vehicle is the lack of stopping and turning ability, Leno says, which is not surprising considering the four-wheel drum brakes and lack of power assist. And keep in mind, the Coronet is not a small car. Still, it's a mean green machine, and it sounds great. Leno also demonstrates the engine's capability to chirp the tires going into second gear, despite having a three-speed automatic and a relatively tall 3.23 rear axle gear ratio. Check out the video above to get the whole story and to hear rumbling V8 noises. Related Video:

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.