2006 Dodge Ram Slt Quad Cab 4x4 Low Miles, Hemi; Excellent Condition!! on 2040-cars

Auto blog

Dodge Challenger SRT Hellcat vs. Chevrolet Camaro ZL1 in latest Head 2 Head

"Olympian" is one of the terms we use to signify the greatest height, the seat of the gods. Yet Mt. Olympus is the second-highest peak in the Balkans ranges, overshadowed by the crest at Musala in Bulgaria's Rila mountains. Both great heights, but one is a little higher. That's how we get the Olympian Chevy Camaro ZL1 pitched at the Musalic Dodge Challenger SRT Hellcat in Motor Trend's latest episode of Head 2 Head. The side-by-side spec sheet is filled with farcical numbers. For the ZL1, that's a 6.2-liter V8 with 580 horsepower, 556 pound-feet of torque, a 4,051-pound curb weight, 0-to-60 miles per hour in 3.9 seconds, a quarter-mile time of 12.2 seconds and a base price of just $57,800. Opposing that, the Hellcat wrings out its 6.2-liter V8 for 707 hp, 650 lb-ft of torque, weighs 4,449 pounds, does the quarter in 11.7 seconds and has a base price of just $60,990. Except in the case of the Hellcat, when Motor Trend put it on the dyno the machine spit out a reading of 672 hp and 606 lb-ft at the wheels. If there's a 10-percent driveline loss through those beefed-up internals and heavy-duty eight-speed transmission, that means the Hellcat is actually rated at about 750 horsepower and 700 lb-ft. But once they get put on a closed-off strip of coast road in Northern California, there are only a few strands of hair between their respective performances. That's not the case for they sensations provide; host Jonny Lieberman calls one of them, "One of the most incredible cars ever made," and says, "It changes everything." Watch the video above to see who got the verdict and how. Related Video:

The Dodge Demon isn't the only way to a 10-second quarter mile

The Demon's rear tires smoke, the front tires lift – and in under ten seconds (after having spent $85,000) you've covered a quarter mile. In short, we fully get the attention shown Dodge's SRT Demonstrator. With disruption the operative word of the times, it's good to see a representative of the movement coming from Detroit. The SRT Demon delivers disruption in spades. There is, however, a viable alternative – and it doesn't require getting on the list at your Dodge dealer. If you want to do 0-60 in under three seconds or the quarter mile in around 10, the folks at Honda, Kawasaki, Suzuki and Yamaha – with any of their one-liter superbikes – have you covered. The gestation of what we now know as the superbike came roughly a decade after the debut of the muscle car. It was in the early '70s, as emission and safety regulations – along with rising insurance premiums – decimated the ranks of Detroit's fastest that motorcycle makers found their magical, almost mystical momentum. Honda's CB750 four was arguably the first, followed soon by Kawasaki's Mach III and Z-1. After that, it was Katie-bar-the-door, with more horsepower offered by Japanese OEMs until, invariably, insurance premiums went higher and, during the last recession, 20-somethings couldn't get affordable loans or insurance. Today, Japan's Big Four are once again engaged in a horsepower war, fueled by the rising interest in MotoGP, along with the rising profits available when selling a $20,000 motorcycle. And if that $20,000 - $10K per wheel – seems high, simple math tells you it's less than half of what you'll spend per corner if buying Dodge's Demon. The specs tell the tale. The Demon, fattened by both its flared fenders and a platform dating from the George Bush administration, supports its 4,200+ pounds on a wheelbase of 116 inches. That's in contrast to Suzuki's GSX-R1000 – redesigned for 2017 – which puts its 443 pounds atop a wheelbase of just 56 inches. To maximize its Hemi-supplied 800+ horsepower, Dodge diverts the air conditioning from the Demon's interior to the engine, which makes racing on a summer evening (you guessed it) devilishly hot. On Suzuki's GSX-R1000 – or similarly-equipped superbikes – almost all of the air at 100+ miles per hour is directed at you. To further underscore the differences, know that the GSX-R1000 and its like-minded competition can turn a quick corner, while the Demon is hard-pressed to execute a U-turn at the end of a quarter-mile straightaway.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat