2005 Dodge Ram 1500 Pickup on 2040-cars

Auto blog

Driving the Jeep J6, Shakedown Challenger and other Mopar concepts

Mopar has been a one-stop-shop for factory-backed performance modifications and accessories on FCA products for a long time now. You want a 707-horsepower engine for your old Plymouth Belvedere? Mopar has you covered with the Hellcrate. Maybe you want a lift and off-roading lights on that newly-bought Wrangler? Mopar can accommodate those wants (or needs, we don’t judge) as well. We get to see some of the companyÂ’s weirdest creations every now and then, but rarely do we get the opportunity to drive the FCA Mopar concepts. ThatÂ’s what made this past Woodward Dream Cruise so special: We got to rip some of MoparÂ’s finest and most recent creations up and down Woodward Avenue. Everything from a 1971 Challenger restomod to the brand-new Easter Jeep Safari J6 concept was in attendance, so letÂ’s get right to it. Mopar Woodward View 6 Photos 1967 Plymouth Hellvedere This car is near the pinnacle of what you can do with off-the-shelf Mopar purchases. It was only a humble 1967 Plymouth Belvedere before Mopar dropped the 707-horsepower supercharged V8 from the Hellcat into the engine bay. Sound ridiculous? Yeah, it is. Other parts of it are new as well, including the disc brakes. Good call. However, Mopar didnÂ’t remove the classic car charm from the entire driving experience. The steering, for example, is surely as slow and inaccurate as it was back in 1967. That doesnÂ’t help matters when youÂ’re trying to put 707 horsepower to the pavement with less-than-ideal rear rubber. Floor it in damn near any gear of the Tremec six-speed, and the front end rises straight up as the rear kicks sideways with the force of many mules. There are no electronics such as traction control or stability control to step in and wrangle the car into submission. But hey, who wants them, anyway? The question remains: Should you buy a Hellcrate engine for your classic? If money were no object, the easy answer is yes. Have at it so long as you love smoky burnouts and excessive amounts of horsepower. Just make sure you know how to deal with that much power before you stick your right foot in it.   Dodge Challenger Shakedown View 15 Photos 2016 Dodge Shakedown Challenger Concept WeÂ’re going downhill in horsepower with this restomod, but the drivability and ease of driving goes way up. Dodge showed this “Shakedown” concept at SEMA awhile back, and as with most concept cars, getting a chance behind the wheel is a special opportunity.

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat

Mopar teases a big Hemi crate engine for SEMA

Mopar has released a new video teaser hinting at the release of a large and powerful crate Hemi engine at SEMA later this month in Las Vegas. The video functions like a lesson on symbolism in an English lit class. It opens with smoke and settles on a pair of backlit, large-clawed paw prints that look to be feline in origin. Then we hear earth-shaking pounding sounds of something larger than the paw prints that stomps over them. Then cue an overhead shot of what looks to be a vintage-model Dodge Charger and its growly Hemi engine entering the frame and then gunning the engine. Mopar already offers three crate Hemi V8 engines, topped by the 6.2-liter supercharged Hellcat, good for 707 horsepower and 650 pound-feet of torque, found in the Dodge Charger SRT Hellcat and marketed for pre-1976 classic muscle cars. So promising that "Something big is coming" is really saying something. Could it be a crate version of the 808-hp Hemi 6.2 that was found in the Dodge Demon, which was rated at 840 hp on racing fuel? Or is it something different? Curiously, Mopar says its reveal is planned for Tuesday, Oct. 30 at the odd time of 4:26 p.m. Could that time be a reference to the 426 Hemi — and specifically the Generation III 426 Hemi "Elephant" that Chrysler made several years ago? That technically qualifies as "bigger," and it would also align with both the muscle car-era Charger and round, earth-shaking footprints shown in the video. Time will prove whether we were right. Related Video: Image Credit: Mopar SEMA Show Chrysler Dodge Performance Classics dodge demon dodge charger srt hellcat