1998 4x4 4wd V8 Red Automatic Camper Shell Extended Cab Pickup Truck on 2040-cars

Auto blog

2017 Dodge Durango GT Brass Monkey: A funky winter drive

The 2017 Dodge Durango is one of our favorite sport utility vehicles. It has power and style and it stands out in a segment that is filled with vanilla-flavored people haulers. We recently had a Durango GT outfitted in Brass Monkey trim – highlighted by its 20-inch burnished bronze aluminum wheels - and took to the back roads of Michigan for an extended drive. The snow was flying. The temperatures dropped. It was muddy. The unpaved roads, pocked and rutted, were jarring, even though the forested setting was serene. The Durango had no trouble with any of it. Watch our video review for the complete experience.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Grand Caravan to live in fleets through 2017

After a hard-working career of hauling around families for decades, the Dodge Grand Caravan name was set to retire in 2016 under FCA's five-year plan for the US. The decision would have put all of the automaker's focus behind the next-generation Chrysler Town & Country, but that original strategy might have changed. Now, Dodge's minivan may have to work just a few more years before it can finally shuffle off. There are set to be 2016 and 2017 model year examples of the current Grand Caravan, according to an internal FCA production document obtained by Automotive News. This report suggests no changes in the minivan between those two years, and there's no mention of the company's intentions deeper into the future. "While we've announced the Grand Caravan will eventually be the minivan that goes away, we're not going into more detail at this time," a Dodge spokesperson said to AN. For the next Town & Country, production would start in Windsor, Ontario, in late February 2016. This document also suggests a brief run of 2016 Chrysler minivans based on the current model from August 2015 until February 2016. Automotive News speculates that the reprieve for the Grand Caravan could allow that model to focus on fleets and the Canadian market while the new Town and Country gets up and running. The latest generation T&C will reportedly debut at the 2016 Detroit Auto Show and will possibly carry a higher price to befit a vehicle with a more modern platform and improved tech.