04 Dodge Ram Slt Quad Cab, 4 Wheel Drive, Cloth Seats, We Finance! on 2040-cars

Auto blog

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.

Jay Leno drives the Demon-powered SpeedKore carbon fiber Dodge Charger

Jay Leno drives all sorts of wild vehicles on his TV and YouTube series "Jay Leno's Garage," from concept cars to classics. Although many of the vehicles are museum quality, they don't all come through in straight by-the-book factory form, as Leno often likes to highlight the creative and insane builds from premium speciality aftermarket shops. One of his favorites is SpeedKore, which recently dropped by with its carbon-fiber-bodied 1970 Dodge Charger Evolution. After cementing itself as one of the best builds of the year at SEMA 2018, the high-performance Charger paid Leno a visit to show off its immaculately assembled blend of classic and modern Dodge. It's not the first time SpeedKore has stopped by, as they've previously shot videos together of the 1967 Chevrolet Camaro, the 2016 Ford Mustang Shelby GT350R, and the 1970 Dodge Charger Tantrum. The Charger featured here wears its Evolution name because it is an updated take on the Tantrum build (which had 1,650 horsepower, by the way), but the two are quite different. The Charger Evolution uses numerous parts from Dodge's recent superstars, the Challenger SRT Hellcat and the Challenger SRT Demon. In fact, it's one of the only ways in the world to drive a Demon engine with a manual transmission. Under the hood is the 6.2L Supercharged Hemi V8 from a Demon pre-production car, and SpeedKore has tuned it up to 966 horsepower. It pairs with a Tremec M6 6060 six-speed transmission from the Hellcat. At full bore, the whine of the supercharger paired with the grumble from the custom stainless steel SpeedKore exhaust headers makes for a thrilling, if not unharmonized, battle cry. Whereas some restomods have cut corners, shoddy build quality, or imperfect fittings, Leno notes that SpeedKore's work is top-notch, despite the entire exterior body and many pieces of the interior being fully replaced with glossy clear-coated exposed carbon fiber. According to SpeedKore Vice President Dave Salvaggio, the Charger weighs about 3,400 pounds. Check out the full video above or read full details from our time with the car at SEMA. And as a bonus, Autoblog photographer Drew Phillips recently got to spend a day shooting the Charger. His gallery of photos appears below. Speedkore 1970 Dodge Charger View 53 Photos

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat