Dodge Power Wagon 1973 on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Last call for Chrysler 300C, Dodge Charger, Challenger: Get your orders in by July 31

We’ve known for a while that the Dodge Challenger and Charger, along with the Chrysler 300C, were going away, and we now have a production end date for the long-running trio of big cars. Earlier this week, we learned that the order books for all three will close at the end of July, ahead of closing production at the end of the year. The 300C has been around since the 2005 model year and has been on sale relatively unchanged since 2011. Chrysler has updated the powertrain choices and technology over the years, but the car we see on sale today is nearly identical to the car we first saw when President George W. Bush was in office. Though it shares a platform and some underlying engineering with the Dodge Charger and Challenger, Chrysler hasnÂ’t gone to the lengths that Dodge did to give the 300C a proper sendoff. Dodge pulled out all the stops with its large cars, offering a series of “Last Call” models highlighting the carsÂ’ power and history. That said, Chrysler did release a limited-production 300C for 2023 that offers a 6.4-liter Hemi V8. ItÂ’s held to 2,000 units and doesnÂ’t have the swagger that DodgeÂ’s cars bring, but there are a few reasons to be excited about the final 300C. With 485 horsepower and 475 pounds of torque on tap, the car can reach 60 from a standstill in 4.3 seconds and run the quarter mile in 12.4 seconds. Those are serious numbers for any car, let alone one that feels like a Barcalounger on wheels. Other upgrades for the final 300C include a 3.09 limited-slip differential, an active exhaust system, and active suspension. If the 300C speaks to you in a way that other rolling sofas donÂ’t, itÂ’s likely too late to grab a limited-production car, but Chrysler is offering the standard 300 — for now.

One-of-four carbon fiber-bodied Dodge Challenger Demon listed for sale

Exclusivity often comes at a high price; in this case, it's $169,995. That's how much Texas exotic car dealer BJ Motors is asking for one of the four carbon fiber-bodied Dodge Challenger Demons built by Speedkore. Many enthusiasts would balk at the idea of spending Audi R8 money on a Demon, but this example isn't your average Challenger. Unveiled at the 2017 SEMA show, and upgraded with 1,400 horsepower the following year, the model ditches the standard coupe's metal body panels for carbon fiber parts to lose about 200 pounds. The example offered for sale has six miles on the odometer so odds are no one has verified its quarter-mile time. The dealer noted the Demon in its inventory is the fourth and final carbon fiber-bodied example built. It's fitted with the stock engine, meaning power comes from a supercharged, 6.2-liter V8 engine that delivers 840 horsepower and 770 pound-feet of torque when burning 100-octane race gas, or 808 horsepower and 717 pound-feet of torque when slurping pump gas. It pops a 2.9-foot wheelie as it screams to 60 mph in 2.3 seconds. The person who ordered this Demon new ticked nearly every box on the list of options. It's equipped with heated and cooled front seats, an 18-speaker sound system, plus two-tone leather and Alcantara upholstery. However, as AllPar pointed out, the dealer makes no mention of the Demon Crate, which included skinny front tires, a block-off plate for the passenger-side door mirror, and a conical air filter, among other go-fast goodies. While spending $170,000 on a Dodge Challenger sounds utterly insane, we wouldn't be surprised if this rare example in like-new condition finds a new home quicker than the Demon goes down a drag strip. Dodge made 3,300 units and stock, metal-bodied examples with delivery mileage sold for an average of $143,000 in 2018, according to Hagerty. AllPar learned Speedkore charged $90,000 for the carbon fiber conversion. The equation tilts in favor of the buyer, which suggests the car's next owner may be more of an investor than an enthusiast. If you're more into classics, Speedkore also gave a 1970 Charger the carbon fiber treatment and rounded out the modifications with a 996-horsepower Demon crate engine. Alternatively, if you have a family to haul, the company made a carbon fiber-bodied Charger with 1,525 horsepower at the crank when running 26 pounds of boost. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences.