Grey With Red Int. Convertible on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Nine cars we wish were convertibles

The snow has melted, the sun is shining, and the days are getting longer. At the Autoblog Detroit office we feel like our winter hibernation is finally over. And with warmer temperatures come visions of opening up a convertible roof and cruising. You know, just turn up the bass and let the Alpine blast. There are plenty of droptops on sale in the US, and more on the way (like the 2016 Mazda MX-5 Miata). That said, we always want more. More! More! More! In that spirit, we cooked up a list of nine cars aren't currently sold as convertible, but ought to be. Check out our picks, below. Summer's just around the corner. Subaru BRZ / Scion FR-S In some parallel universe, this car actually happened. Toyota showed us a FT 86 Convertible concept at the Geneva Motor Show in 2013, and we immediately started licking our chops over the thought of a rear-wheel-drive convertible based on the Subaru BRZ and Scion FR-S twins. These days, the MX-5 Miata is our only option for affordable roadster fun. A competitor to the Mazda seems like a no-brainer to us, especially since we have naught but good to say about the BRZ/FR-S as-is. Unfortunately in our present timeline, this car is as likely for production as a BRZ STI. Which is to say, not very. Dang. Lexus RC F Unlike the FR-S, a convertible from Toyota's luxury division might actually see the light of day. The current IS convertible is about to be phased out, and the Lexus LF-C2 concept from the 2014 Los Angeles Auto Show is really a thinly veiled look at a possible RC convertible. A droptop RC would be plenty good, but let's reach for the starts. What we really want is to run topless in an RC F, complete with that powerful, loud, 5.0-liter V8 engine. Lexus says the RC F is a true competitor to the BMW M4. If that's true, it only makes sense for Lexus to mimic the Germans and offer its performance coupe in a folding hardtop form. Maybach Landaulet Maybach is bach back, recast as an upper crust trim level for Mercedes-Benz. The Mercedes-Maybach S600 is seriously awesome, and more luxurious than a trip to the spa. But why not go a step into the truly ridiculous levels of extravagence and bring back that open-top Landaulet? We think your local princess will love this idea, and with better S-Class bones underneath, Jeeves will have a pretty enjoyable ship to steer, too. Besides, with that slick new Mercedes design language, a Landaulet redux wouldn't be nearly as hideous as the old model, pictured here.

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.