Clear Fla. on 2040-cars

Auto blog

J.D. Power 2020 Initial Quality Study puts Dodge and Kia in first place

For the first time ever, an American automaker is ranked at the top of J.D. Power's yearly Initial Quality Study as Dodge tied with Kia for the top spot. Kia landed in first from second place last year — though it's Kia's sixth consecutive year as the top-ranked "mass market" brand — while Dodge jumped an impressive seven spots to move into a tied first from eighth in the 2019 edition of the study. Dodge is one of seven domestic automakers that find themselves in the top half of J.D. Powers' 34th consecutive IQS study. Dodge and Kia's score of 136 problems experienced per 100 vehicles (PP100) puts them ahead of Chevrolet and Ram (141 PP100), Genesis (142 PP100), Mitsubishi (148 PP100) and Buick (150 PP100), which make up the top five after accounting for tied scores. GMC, Volkswagen, Hyundai, Jeep and Lexus round out the top 10. As you probably noticed, Mitsubishi and Lexus are the only Japanese brands to make it into the first 10 spots, and Genesis took home the award as the top-ranked premium brand. This is the first year that J.D. Power released data on the survey results from Tesla owners, and it's not good news for the California-based electric vehicle manufacturer. With an adjusted score of 250 PP100, Tesla is in dead last place on the 2020 IQS Study, just behind Land Rover's score of 228 PP100. It's worth noting that Tesla's score isn't an official entry into the IQS study because surveys were only available in 35 states as the company is the only automaker that has not granted J.D. Power permission to survey Tesla owners in the 15 other required states. According to J.D. Power, about a third of all problems reported by owners of 2020 model-year vehicles within the first three months of ownership relate to issues with infotainment and technology. In many cases, the high-tech systems aren't broken, but are difficult for owners to use or don't work as well as they should. Those issues are "just as severe as other problems," according to Dave Sargent, vice president of automotive quality at J.D. Power, especially since a "customer is stuck with this [issue] for the rest of the time they own the vehicle." J.D. Power surveys the owners of new cars with a questionnaire that covers 223 problems organized into nine categories: climate, driving assistance, driving experience, exterior, features/controls/displays, infotainment, interior, powertrain and seats.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat