1985 Dodge D150 on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

NHTSA is investigating FCA shifters for roll-away accidents again, this time the rotary units

It seems FCA's shifter troubles aren't over yet. Now, just a few months after issuing a recall to resolve user-related issues with its monostable shifters, the company is again under investigation by NHTSA. The issue is related to the potential for cars to roll away when the rotary-style shifter is not properly placed in park. Two FCA models are the subject of this investigation: the 2013–2016 Ram 1500 and the 2014–2016 Dodge Durango. NHTSA estimates about 1,000,000 vehicles would be affected if a recall is issued. The investigation was started following 43 complaints of vehicles rolling away while supposedly being in "park." Among the complaints were reports of 25 crashes and 9 injuries. NHTSA does point out that in every incident, the parking brake was not engaged. A representative from FCA also gave us an official statement regarding the investigation: "FCA US is cooperating fully with NHTSA's investigation, the scope of which is limited. Other vehicles equipped with rotary shifters are not included. In accordance with prudent practice, the Company joins NHTSA in urging all drivers to use their vehicles' parking brakes." View 35 Photos As mentioned above, other Chrysler products with rotary shifters, such as the Pacifica minivan and 200 sedan, are not involved in this investigation. One of the key differences, as the representative told us, is that these vehicles have electronic parking brakes that automatically engage if the driver does not select park and then opens the door with the seatbelt unbuckled. The Ram 1500 and Durango feature mechanical, manually operated parking brakes and therefore cannot activate the brake automatically. Because this is currently an investigation, an exact cause for the incidents has yet to be determined, and none of the vehicles have been recalled. It's possible there could be a mechanical defect. However, the issue could be a confusing interface causing user error, as was the case with FCA's monostable shifters, where drivers think they've put the car in park but actually haven't. Something that indicates it could be a case of confused users is that NHTSA also opened an investigation into 2012–2014 Jaguar XF and Land Rover Range Rover Evoques for similar issues. Both vehicles use a rotary shifter and have had roll-away complaints levied as well. Even if it is a case of user error, FCA and Jaguar Land Rover may still have to recall their vehicles.

FCA issues recall for 300k Dodge Chargers over airbag sensor

Fiat Chrysler Automobiles has issued another recall, this time for the Dodge Charger. The issue stems from an overly sensitive control module that could deploy the side-curtain airbag and seatbelt pretensioner if the door is kicked or slammed too hard. The recall affects certain Charger sedans from the 2011-2014 model years, specifically those manufactured between May 6, 2010, and June 5, 2014. All told, that amounts to an estimated 322,078 units, including 284,153 in the United States, another 13,169 in Canada, 2,484 in Mexico, and 22,272 overseas. Owners of those vehicles will be asked to bring their vehicles in to their local dealers to have the Occupant Restraint Control module recalibrated, and are being advised in the meantime to "exercise caution when closing doors." If this issue sounds familiar, that's because the automaker issued a similar recall for Ram trucks just last week, affecting over 667,000 four-door pickups in the United States alone. Following a further investigation into its passenger cars, FCA found a similar problem with the Charger, whose door design mandated specific calibration of the module in question for that model. The company says it is aware of three minor injuries potentially related to the issue, but no accidents. This campaign is just the latest in a string of recall-related issues to have emerged from Auburn Hills recently. The Ram truck recall was issued in tandem with another airbag-related recall for a further million pickups. Prior to that it called in another 1.4 million vehicles to update their infotainment system software due to a security issue. Another 350,000 Dodge Journeys were called in before that to have their engine covers secured. The National Highway Traffic Safety Administration is expected to issue the company a massive hundred-million-dollar fine for failing to follow proper procedures related to safety and recall issues. Meanwhile, another NHTSA investigation that could have affected 4.7 million units was closed with no further action deemed necessary. And an appeal court judge in Georgia reduced the damages the company will be ordered to pay the family of a child who died in a fire in a Jeep Grand Cherokee. Statement: Occupant Restraint Control Module August 1, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to recalibrate control modules on approximately 284,153 U.S.-market sedans to prevent inadvertent side-curtain air-bag and seatbelt pre-tensioner deployment.