Find or Sell Used Cars, Trucks, and SUVs in USA

1978 Dodge Li'l Red Express Truck on 2040-cars

US $20,000.00
Year:1978 Mileage:81000
Location:

Edmond, Oklahoma, United States

Edmond, Oklahoma, United States
Advertising:

Have a 1978 Li'l Red Express pick up. It has just over 81k miles the truck is in great shape for the age. The paint is in decent shape along with the interior. The engine could stand to be repainted but nothing to serious. This would be a great driver and show truck. It always turns heads when I'm out in it. Since I've owned the truck I installed the original stacks with factory tips, put a set of crager draglites with 10" rear wheels and skinnys on the front. The truck also has the  factory am/fm/cb with the correct antenna. I do have the factory slotted mag wheels as well. This truck is a true factory muscle truck and real performer. Couldn't ask for a better driving vehicle.

This is one of the most unique trucks ever produced by Dodge. This was the fastest production vehicle out performing the corvettes and trans ams at that time. these trucks were produced because of a loophole in the emissions regulations. The Li'l Red Truck did not come with catalytic converters, what the Li'l Red's did have was a special high performance 360 C.I.  4-barrel small block engine, which was a modified version of the 360 police engine. The package also included hemi style mufflers with a crossover pipe breathing through 2 chrome stacks located behind the cab, a special 727 transmission and 3.55:1 rear gearing. There were 2,188 of the 1978s produced out of those there is an estimated 679 remaining. As the years go by these trucks are harder to come by that are original with the factory motor and transmission. 



This vehicle is listed for sale locally and reserve the right to end auction at anytime.

Thanks for looking and happy bidding!

Auto Services in Oklahoma

T & W Tire Co. ★★★★★

Auto Repair & Service, Tire Dealers, Tire Recap, Retread & Repair
Address: 500 E Main St, Konawa
Phone: (580) 332-5145

Swanson Tire Co. ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Wheels-Aligning & Balancing
Address: 1000 N Hudson Ave Oklahoma City, Oklahoma-City
Phone: (405) 463-2286

Stillwater Automotive ★★★★★

Auto Repair & Service, Automobile Electric Service, Brake Repair
Address: 1821 S Perkins Rd, Stillwater
Phone: (405) 743-2611

Standard Machine ★★★★★

Automobile Parts & Supplies, Welders, Hose Couplings & Fittings
Address: 5610 S US Highway 69, Savanna
Phone: (918) 423-9430

Sooner Fiberglass ★★★★★

Auto Repair & Service, Fiberglass Fabricators, Boat Maintenance & Repair
Address: 312 SE 89th St, Bethany
Phone: (405) 632-8995

Ron`s Tire & Lube ★★★★★

Auto Repair & Service, Tire Dealers, Auto Oil & Lube
Address: 17951 County Road Ns 222, Frederick
Phone: (580) 335-5029

Auto blog

The Dodge Demon was developed under a cloud of smoke

Tue, Jun 6 2017

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.

2018 Dodge Challenger Demon, 1970 Charger become Lego cars

Wed, Jan 2 2019

As much as we all would have loved to buy one, Dodge made sure that it wouldn't be easy for everyone to own a 2018 Dodge Challenger SRT Demon. It was only built for one model year, with a total of 3,000 units, and the last one was built last summer. And even if they were still available, each one started at just under $85,000, a substantial chunk of change. But thanks to Lego, there's a comparatively cheap way to get a new Demon: in tiny brick form. The toy company has added another kit to its Speed Champions line featuring a yellow Challenger Demon. Since the Speed Champions cars are quite small, it's a somewhat rough facsimile of the car, but it's still instantly recognizable. It's blocky, it has a big hood scoop and fat fender flares. It also has two sets of wheel covers to customize it. This kit has an advantage over a real Demon, too: it comes with a second car. The other one is a 1970 Dodge Charger in black. This is an even more faithful rendition, thanks in part to the real car's ruler-straight lines. It doesn't have customizable wheels, but you can choose whether to leave it stock, or stick on a little replica of a supercharger and hood scoop that poke through the hood. It ends up looking like Dominic Toretto's Charger from The Fast and the Furious. Besides the second car, the kit features a drag strip starting tree. It doesn't light up, but it does have a slider on the back that lifts up each set of colored bricks as it's pressed down. So you can have little drag races with the two cars. In total, everything is built with 478 pieces, and it will cost you $29.99. The kit is available now wherever Lego kits are sold, and even at the Dodge merchandise website. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

EV cost burden pushing automakers to their limits, says Stellantis' CEO Tavares

Wed, Dec 1 2021

DETROIT — Stellantis CEO Carlos Tavares said external pressure on automakers to quickly shift to electric vehicles potentially threatens jobs and vehicle quality as producers struggle with EVs' higher costs. Governments and investors want car manufacturers to speed up the transition to electric vehicles, but the costs are "beyond the limits" of what the auto industry can sustain, Tavares said in an interview at the Reuters Next conference released Wednesday. "What has been decided is to impose on the automotive industry electrification that brings 50% additional costs against a conventional vehicle," he said. "There is no way we can transfer 50% of additional costs to the final consumer because most parts of the middle class will not be able to pay." Automakers could charge higher prices and sell fewer cars, or accept lower profit margins, Tavares said. Those paths both lead to cutbacks. Union leaders in Europe and North America have warned tens of thousands of jobs could be lost. Automakers need time for testing and ensuring that new technology will work, Tavares said. Pushing to speed that process up "is just going to be counter productive. It will lead to quality problems. It will lead to all sorts of problems," he said. Tavares said Stellantis is aiming to avoid cuts by boosting productivity at a pace far faster than industry norm. "Over the next five years we have to digest 10% productivity a year ... in an industry which is used to delivering 2 to 3% productivity" improvement, he said. "The future will tell us who is going to be able to digest this, and who will fail," Tavares said. "We are putting the industry on the limits." Electric vehicle costs are expected to fall, and analysts project that battery electric vehicles and combustion vehicles could reach cost parity during the second half of this decade. Like other automakers that earn profits from combustion vehicles, Stellantis is under pressure from both establishment automakers such as GM, Ford, VW and Hyundai, as well as start-ups such as Tesla and Rivian. The latter electric vehicle companies are far smaller in terms of vehicle sales and employment. But investors have given Tesla and Rivian higher market valuations than the owner of the highly profitable Jeep and Ram brands. That investor pressure is compounded by government policies aimed at cutting greenhouse gas emissions. The European Union, California and other jurisdictions have set goals to end sales of combustion vehicles by 2035.