Find or Sell Used Cars, Trucks, and SUVs in USA

1964 D 100 Short Wheel Base Fleet Side 318 Automatic With Original Bed ! on 2040-cars

Year:1964 Mileage:25263
Location:

Athens, Alabama, United States

Athens, Alabama, United States
1964 D 100 Short Wheel base fleet side 318   Automatic with original bed !, image 1
Advertising:
Body Type:Pickup Truck
Vehicle Title:Clear
For Sale By:Private Seller
Engine:318
Transmission:Automatic
VIN: 90117664 Year: 1964
Make: Dodge
Model: Other Pickups
Trim: base
Drive Type: AUTO
Number of Cylinders: 8
Mileage: 25,263
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"This is a 1964 D100 Has some rust on the step in's at the doors but they are strong enough to hold at least 275 LBS. The bed has some rust on the sides where the bed held some water but they would be easy repairs. The dash and instruments are all original and the floor boards are still strong. All the glass is original and NO CRACKS! The 318 engine will run and go but truck needs brakes re-done. This was going to be Father/Son Project but we don't have time to do it. Great truck to restore or build Rat/Rod.."

 This is a  Solid 1964 D-100  This is a Fleetside short wheel base that has original wood and rails in the bed. The truck body is very good, just needs some TLC.  All the glass is original and NO CRACKS! The 318 engine will run and go.  Has some rust on the step in's at the doors but they are strong enough to hold at least 275 LBS. The bed has some rust on the sides where the bed held some water but they would be easy repairs. The dash and instruments are all original and the floor boards are still strong. All the doors open and close as they should and the hood also operates as it should.  Bakes need Master Cylinder and Wheel Cylinders.  This was going to be Father/Son Project but we don't have time to do it. Great truck to restore or build Rat/Rod..

Auto Services in Alabama

Worldpac ★★★★★

Automobile Parts & Supplies
Address: 260 Oxmoor Pl, Cahaba-Heights
Phone: (205) 621-8828

Wayne`s Auto Service ★★★★★

Auto Repair & Service
Address: 2316 Highway 78, Sumiton
Phone: (205) 648-3003

Waites Tire and Service Center ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Wheel Alignment-Frame & Axle Servicing-Automotive
Address: 310 Battle St E, Talladega
Phone: (256) 362-6632

Vinnies Auto Repair ★★★★★

Auto Repair & Service
Address: 26030 Capital Dr., Loxley
Phone: (251) 213-8257

Vestavia Auto Service ★★★★★

Auto Repair & Service, Automobile Repairing & Service-Equipment & Supplies, Brake Repair
Address: 2000 Buena Vista Dr, Vestavia
Phone: (205) 979-3661

Trammell Mike Body Shop ★★★★★

Auto Repair & Service, Automobile Body Repairing & Painting
Address: 2121 2nd Ave S, Birmingham
Phone: (205) 323-5515

Auto blog

Stellantis reveals STLA Large platform with EV and ICE support

Fri, Jan 19 2024

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Fiat Chrysler's next-generation Uconnect is faster, built on Android

Mon, Jan 27 2020

If you're a regular reader of Autoblog, you know that for a long time we've liked Fiat Chrysler's Uconnect infotainment system for its bright, clear, responsive touchscreen interface. Now, according to the company, it will be better than ever with Uconnect 5, the latest iteration of the system. It has upgraded hardware and a revamped graphic user interface (the stuff on the screen). Looking at sample screens shown above, there are characteristics shared with the old system, such as the time, status and shortcuts at the top and the menu icons at the bottom. In the middle, the major change is the addition of home screens that can be customized with favorite menus and readouts that are always available. Each of these home screens can have up to four functions and you can have five pages to flip through. The graphics themselves feature more legible fonts and updated icons. Each car brand will get its own set of icons, colors and textures to help create unique experiences. And while each Fiat Chrysler product will be able to have Uconnect, including Alfa Romeo that has until now lacked Uconnect, each brand has the ability to make small tweaks including the screen orientation. The system will support displays in landscape, portrait or square, so different brands may choose different shapes. Powering Uconnect 5 is a processor Fiat Chrysler says is six times more powerful than what's in current systems. It features 6 gigabytes of RAM and 64 gigabytes of internal storage. The processor also supports screens as large as 12.3 inches with as many as 15 million pixels, or nearly twice that of a 4K resolution TV. The system can display information on up to four screens, too. Uconnect 5's firmware is built on Google's Android operating system, joining a few other automakers in using Android as a base for their infotainment systems. Uconnect 5 brings with it a number of new features. It brings full Alexa integration, so you can use it just like you do at home, provided you have a data plan for the car. Apple CarPlay and Android Auto continue to be standard, but now they can be used wirelessly. You can also now connect two phones via Bluetooth wirelessly so you can access content from both. Navigation gets real time information and updates from TomTom. Users can create five profiles with unique climate, radio and instrument settings, plus one for a valet.

Chrysler investing $20M in Toledo plant to support 9-speed auto production

Sun, 28 Apr 2013

In 2011, Chrysler announced a $72-million investment in its Toledo Machining Plant to modernize production of the eight- and nine-speed torque-converters for automatic transmissions made there. That upgrade work won't be finished until Q3 of this year, but Chrysler has already announced a further $19.6-million investment to increase production capacity for the nine-speeders.
The extra units will be necessary because the nine-speed transmission they'll be mated to is going into three popular models: it will debut on the 2014 Jeep Cherokee, then go into the Chrysler 200 and Dodge Dart. The company predicted that this year alone it would sell 200,000 units equipped with the nine-speed tranny, and it is spending some $374 million in addition to the investment in Toledo to upgrade production capacity for it.
The work attached to this new investment won't begin until Q3 of 2014, and it will be finished by the end of that year. There's a press release below with all the details.