2001 Dodge Neon Base Sedan 4-door 2.0l on 2040-cars

Auto blog

Dodge Durango SRT Pursuit packs the 797-horsepower Hellcat Redeye engine

When the Jeep Grand Cherokee SRT Trackhawk launched we were stunned that it featured both the 707-horsepower Hellcat engine and all-wheel drive. But SRT has one-upped itself with a custom Durango for the One Lap of America motorsports event. It's called the Dodge Durango SRT Pursuit — nicknamed "Speed Trap" — and it has the 797-horsepower Hellcat Redeye engine, and it still has all-wheel drive! Besides the 90-horsepower advantage over the stock Trackhawk, the Durango SRT Pursuit race SUV gets improved handling via concept lowering springs and 11-inch wide wheels with 305-mm wide tires that are shared with the Challenger Hellcat Widebody. It has improved stopping ability from 15.75-inch brake rotors up front with 6-piston calipers, and 13.78-inch rotors with four-piston calipers. This is the same kind of setup as the Trackhawk uses. Oddly enough, Dodge left the factory heated and cooled front seats, but removed the two rear rows of seats for weight savings. The Durango also gets a roll cage and racing harness. The finishing touches include a cat-back exhaust and the low-profile police light bar and paint scheme. Now before you ask, there don't appear to be plans to put a Redeye-powered Durango into production. With that being said, the company clearly has the capability to mate that engine to an all-wheel-drive system, and it would be hard to imagine the company not capitalizing on that. Even if the powertrain didn't make it to a Durango, it would seem like a great complement to the existing Grand Cherokee Trackhawk, or even an updated version of it. Hint, hint, wink, wink, FCA. Related Video:

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

The Grand Caravan, at least the name, isn't dead yet in Canada

Last week we got Stellantis. This week, we’re learning that the Grand Caravan name isnÂ’t actually dead. ItÂ’s just moved to Canada. Allow us to explain. The Dodge Grand Caravan is well and truly gone. However, FCA has decided the name is too good not to use. Therefore, FCA Canada just announced that Canadians will get the Chrysler Grand Caravan for the 2021 model year. One look at the photos will tell you most everything you need to know about the van. ItÂ’s a rebadged Chrysler Voyager, which itself is a budget Chrysler Pacifica by a different name. Basically, the U.S. gets the Voyager, and Canada gets the Grand Caravan. “WeÂ’re incredibly proud to maintain the ‘Grand CaravanÂ’ nameplate exclusively in the Canadian marketplace,” said David Buckingham, President and CEO, FCA Canada. “Particularly here in Canada, that name has become synonymous with affordable, safe and innovative family transportation that the 2021 Chrysler Grand Caravan builds upon.” Now that the Voyager and Caravan are the same again, the next logical step would be to bring back Plymouth, right? Rebadged Plymouth Hellcats wouldnÂ’t bother us. Just Â… you know, an idea. Canadian customers will have the choice of two trims for the Grand Caravan: Base and SXT. Similar to the U.S., upper trim levels of the van will be called Pacifica. The two will be sold alongside each other at Chrysler dealerships. Photos of the Pacifica with the Grand Caravan badge already have us a little weirded out, but now youÂ’ll know whatÂ’s going on during your next trip up north when you see a Chrysler Grand Caravan roll by. Related video: