1999 Dodge Neon High Line Coupe 2-door 2.0l on 2040-cars

Auto blog

Dodge Durango SRT Pursuit packs the 797-horsepower Hellcat Redeye engine

When the Jeep Grand Cherokee SRT Trackhawk launched we were stunned that it featured both the 707-horsepower Hellcat engine and all-wheel drive. But SRT has one-upped itself with a custom Durango for the One Lap of America motorsports event. It's called the Dodge Durango SRT Pursuit — nicknamed "Speed Trap" — and it has the 797-horsepower Hellcat Redeye engine, and it still has all-wheel drive! Besides the 90-horsepower advantage over the stock Trackhawk, the Durango SRT Pursuit race SUV gets improved handling via concept lowering springs and 11-inch wide wheels with 305-mm wide tires that are shared with the Challenger Hellcat Widebody. It has improved stopping ability from 15.75-inch brake rotors up front with 6-piston calipers, and 13.78-inch rotors with four-piston calipers. This is the same kind of setup as the Trackhawk uses. Oddly enough, Dodge left the factory heated and cooled front seats, but removed the two rear rows of seats for weight savings. The Durango also gets a roll cage and racing harness. The finishing touches include a cat-back exhaust and the low-profile police light bar and paint scheme. Now before you ask, there don't appear to be plans to put a Redeye-powered Durango into production. With that being said, the company clearly has the capability to mate that engine to an all-wheel-drive system, and it would be hard to imagine the company not capitalizing on that. Even if the powertrain didn't make it to a Durango, it would seem like a great complement to the existing Grand Cherokee Trackhawk, or even an updated version of it. Hint, hint, wink, wink, FCA. Related Video:

Has Dodge stepped in it again with Scat Pack lawsuit?

Lawsuits are an unfortunate part of doing business in just about any industry, so the latest complaint filed by a California-based aftermarket firm against Chrysler would seem to be nothing more than business as usual. But this isn't the first time the two companies have sparred over this particular issue.
According to a report from Automotive News, the dispute revolves around the Scat Pack name that Chrysler first offered on the Charger, Coronet, Dart and Super Bee starting in 1968. Scat Enterprises, a manufacturer of crankshafts and other components for Dodges and other vehicles, sued Chrysler for using its name. A few years later the Scat Pack disappeared from the Dodge catalog.
Fast forward to August 2013 when Chrysler applied to register the Scat Pack name anew. The US Patent and Trademark Office turned down Chrysler's application, but the automaker proceeded anyway, unveiling new Scat Packs for the Challenger, Charger and Dart at last year's SEMA show.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.