49k Low Miles Srt8 Magnum Leather 6.1l Hemi V8 Sunroof Autoamerica on 2040-cars

Auto blog

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mopar Hellephant crate engine sells out in 48 hours

This happened so quickly that we're only just catching up with it. Mopar opened pre-orders on the 7.0-liter Hellephant Hemi crate engine on April 26, which is Hemi Day. According to Allpar, hubbub on social media not long after that day claimed Mopar had gone through all of its Hellephant stock. When Allpar asked Fiat Chrysler for clarification, a spokesperson e-mailed, "Given the high demand and the hand-built, time-intensive build process, we have closed preordering for the 426 Hellephant Supercharged HEMI crate engine. Based on preorders, the engine sold out in just two days. Customers can visit www.cratehemi.com to receive future information and updates on the 'Hellephant' engine." No one is certain how many engines Mopar sold. Allpar wrote, "Industry insiders believe Mopar may be making around 100," but reiterated that it's a guess. The engine and the ordering process have their peculiarities. Mopar Insiders explained that Tool Engineering International helped create the 426-cubic-inch block, and that the Hellephant engine "shares nothing except for displacement with the rumored upcoming 7.0-liter 426 Hemi V8." On the Hellcat.org forum, a poster wrote that the engines "can only be sold through a dealer and that the dealers can only order 1 engine per week." The Hellephant doesn't come with Mopar's three-year, 100,000-mile warranty, either. During a press briefing last October, FCA officials said they weren't sure about offering any warranty. Based on the motor being given a part number starting with the letter P, there is a bit of protection, but it's a 90-day limited warranty covering "defects in materials or wokmanship," and only applies to engines not used in competition. For those who didn't get the opportunity to drop $29,995 for 1,000 horsepower and 950 pound-feet of torque, the best bet is to hope for the return of Apollyon's pachyderm. Motor1 wrote that "Rumors hint at... another limited run scheduled for next year due to overwhelming demand." That's thin thread to hang a Hellephant from, but it beats bupkis.

FCA adds 88k Dodge Challengers to Takata inflator recall

The Takata airbag inflator recall from FCA US is growing 88,346 vehicles larger in the US after the company's discovery of the faulty parts in the 2008-2010 Dodge Challenger. The affected examples have production dates between September 19, 2007, and October 29, 2010, and the coupes need the replacement components on the driver's side. According to chronology posted by the National Highway Traffic Safety Administration (as a PDF), the automaker was auditing the models covered under the campaign in July and "identified a population of vehicles that was inadvertently excluded." Initially, FCA believed these cars were using an unrecalled Takata inflator. The audit revealed that the affected cars indeed used a recalled version. As with the rest of the faulty parts, exposure to moisture can cause them to ignite too quickly during an airbag deployment and spray shrapnel at occupants. The problem has been linked to at least eight deaths worldwide and a vehicle fire in Japan. The Challenger wasn't previously part of FCA's 3.3-million unit national campaign or the subsequent expansion. According to FCA US the parts to complete the repairs in these Challengers aren't currently available. However, owners will be notified of the issue by mail starting August 14. They will receive a second notice when the parts become available. Related Video: RECALL Subject : Driver Side Frontal Air Bag Inflator May Rupture Report Receipt Date: JUL 10, 2015 NHTSA Campaign Number: 15V444000 Component(s): AIR BAGS Potential Number of Units Affected: 88,346 All Products Associated with this Recall Vehicle Make Model Model Year(s) DODGE CHALLENGER 2008-2010 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. Parts to remedy the vehicles are not currently available. Interim notices will be mailed to owners beginning August 14, 2015.