2005 Dodge Magnum Custom 9573 Actual Miles Lambo Doors Viper Hood Ground Effects on 2040-cars

Auto blog

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Chrysler recalls small number of 2013-2014 cars and trucks over engine debris

Chrysler is recalling a small number cars over issues with their 2.4-liter four-cylinder engines. The recall, which affects 522 examples of its 2013 Dodge Avenger and Chrysler 200 models, as well as 2014 Jeep Compass and Patriot CUVs has to do with potential debris in the balance shaft bearings.
The abrasive stuff can cause the oil pressure to drop, which could lead to the engine stalling or outright failure. This situation could at best leave drivers stranded and at worst lead to a crash.
Chrysler will begin notifying owners, who will need to report in to have the balance shaft module replaced. All repairs are naturally free of charge. Scroll down for the bulletin from NHTSA.

FCA issues recall for 300k Dodge Chargers over airbag sensor

Fiat Chrysler Automobiles has issued another recall, this time for the Dodge Charger. The issue stems from an overly sensitive control module that could deploy the side-curtain airbag and seatbelt pretensioner if the door is kicked or slammed too hard. The recall affects certain Charger sedans from the 2011-2014 model years, specifically those manufactured between May 6, 2010, and June 5, 2014. All told, that amounts to an estimated 322,078 units, including 284,153 in the United States, another 13,169 in Canada, 2,484 in Mexico, and 22,272 overseas. Owners of those vehicles will be asked to bring their vehicles in to their local dealers to have the Occupant Restraint Control module recalibrated, and are being advised in the meantime to "exercise caution when closing doors." If this issue sounds familiar, that's because the automaker issued a similar recall for Ram trucks just last week, affecting over 667,000 four-door pickups in the United States alone. Following a further investigation into its passenger cars, FCA found a similar problem with the Charger, whose door design mandated specific calibration of the module in question for that model. The company says it is aware of three minor injuries potentially related to the issue, but no accidents. This campaign is just the latest in a string of recall-related issues to have emerged from Auburn Hills recently. The Ram truck recall was issued in tandem with another airbag-related recall for a further million pickups. Prior to that it called in another 1.4 million vehicles to update their infotainment system software due to a security issue. Another 350,000 Dodge Journeys were called in before that to have their engine covers secured. The National Highway Traffic Safety Administration is expected to issue the company a massive hundred-million-dollar fine for failing to follow proper procedures related to safety and recall issues. Meanwhile, another NHTSA investigation that could have affected 4.7 million units was closed with no further action deemed necessary. And an appeal court judge in Georgia reduced the damages the company will be ordered to pay the family of a child who died in a fire in a Jeep Grand Cherokee. Statement: Occupant Restraint Control Module August 1, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to recalibrate control modules on approximately 284,153 U.S.-market sedans to prevent inadvertent side-curtain air-bag and seatbelt pre-tensioner deployment.