Dodge Cummins Dually Pickup Truck With 24-foot Aluminum Gooseneck Vendor Trailer on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50

Chrysler began selling Dodge-badged Mitsubishis way back in the 1971 model year, when the Mitsubishi Colt Galant became known here as the Dodge Colt. Later in the decade, a Plymouth Arrow-badged version of the Mitsubishi Triton small pickup appeared here, along with a Dodge version known as the D-50 and — a few years later — the Ram 50. Once Mitsubishi began selling the same trucks here as Mighty Maxes, starting in the 1983 model year, the Ram 50 didn't seem quite so specialÂ… and then the Dakota made its debut for the 1987 model year. Still, when the Triton went to its second generation that same year, Chrysler continued selling it as the Ram 50. Here's one of those second-generation trucks, found in a Denver-area self-service yard last month. At this point, GM had long since stopped selling Isuzu Fasters with Chevrolet LUV emblems, as had Ford with the Courier-badged Mazda Proceed (after developing the all-American S-10 and Ranger, respectively). The decision-makers at Chrysler, however, calculated that the Ram 50 could grab some sales from Dodge truck shoppers who felt that the Dakota was too big for their needs; as a result, the Ram 50 stayed on sale here through 1994. The last Mighty Maxes rolled out of American Mitsubishi showrooms in 1996. The 6G72 V6 engine became available in four-wheel-drive Ram 50s a few years after this truck was built, but in 1987 all Ram 50s came with either the 2.0-liter 4G63 Sirius or 2.6-liter Astron four-banger. This truck has the base Sirius, rated at 92 horsepower. Remember when new trucks came with double-digit horsepower ratings? Most American-market small pickups still had manual transmissions during the middle 1980s, though that would change in a hurry with the dawn of the 1990s and the drop in slushbox prices. This one has the base five-speed. Just barely 100,000 miles on the clock, very unusual for a junkyard pickup of this age (especially one with a thick coat of brush-applied white house paint on the tailgate). Maybe the speedometer cable broke 25 years ago. You don't see many rear-wheel-drive pickups with roll bars. You'll find one in every car. You'll see. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Dodge Ram 50 Commercial 1987 Those other Japanese imports hallucinated the Ram 50 in alarming ways. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking

Trump tells Detroit 3 CEOs he wants more US jobs, calls environmentalists 'out of control'

As expected, President Donald J. Trump met with top executives from FCA, Ford, and General Motors this morning as part of a larger push to generate jobs in America. "I want new plants to be built here for cars sold here!", Trump said in a tweet ahead of the meeting. Not everything said in the meeting was made public, but the President later tweeted that he had a "Great meeting with automobile industry leaders." FCA CEO Sergio Marchionne, Ford chief Mark Fields, and GM's Mary Barra all echoed the positive vibes after the meeting. In a statement, Barra called the discussion "very constructive and wide-ranging," adding that it focused on "policies that support a strong and competitive economy and auto industry," and "that supports the environment and safety." That's noteworthy, because Trump is reported to have said "I am to a large extent an environmentalist. I believe in it, but it's out of control." Fields, speaking to reporters after the meeting, said, "We're excited about working together with the president and his administration on tax policies, on regulation and on trade to really create a renaissance in American manufacturing." The Ford CEO was specifically talking about Trump's withdraw from the Trans-Pacific Partnership. "We've repeatedly said that the mother of all trade barriers is currency manipulation, and TPP failed in meaningfully dealing with that, and we appreciate the president's courage to walk away from a bad trade deal," he said. Marchionne focused on American manufacturing in his statement after the meeting. "I appreciate the President's focus on making the US a great place to do business. We look forward to working with President Trump and members of Congress to strengthen American manufacturing." Perhaps equally as interesting as what was said and who was invited are what wasn't said and who wasn't invited. Trump has been very vocal about his distaste for US automakers' plants in Mexico, but no mention was made of the North American Free Trade Agreement by Trump or any of the Detroit CEOs after the meeting. We also have to wonder if Trump plans to meet with representatives from German, Japanese, and Korean automakers that have made massive investments into American plants and produce a large number of cars in this country. Related Video: News Source: Reuters, General Motors, Fiat Chrysler Automotive, Donald J.