Fwd 4dr Se Low Miles Sedan Automatic Gasoline 2.4l Dohc Dual Vvt 16-valve I4 Eng on 2040-cars

Auto blog

Here are the Challenger SRT Demon's bare-minimum performance numbers

This week's Dodge Challenger SRT Demon teaser video provides what seems like more concrete evidence than any of the others before it. We say it seems that way because the numbers flashed on the screen are likely not showing us everything the car has to offer. So we're looking at these as the minimum performance stats and expecting Dodge to reveal even crazier numbers alongside the car next month. The video also provides some hints at features and modes the car will offer. Let's pick it apart. First off, there's the performance data from the various SRT Performance Pages screens. The 0–60 mph time is 3.0 seconds, which compares well to the "regular" Hellcat's 3.5-second manufacturer claim. Then there are two 0–100 times: 6.08 and 6.8. An eighth-mile time of 6.6 seconds at 125 mph and a quarter-mile time of 0.5 seconds at 129 mph lead us to believe the driver lifted off the throttle in that second eighth-mile and that the car will actually do the quarter in the low 10s. For reference, Dodge claims an 11.2-second quarter for the Hellcat on its street tires and a 10.8 with race slicks. View 7 Photos We also get a cryptic message about the supercharger boost pressure, which suggests it will be higher than the 11.6 psi of the 6.2-liter Hellcat engine. A graph shows it heading up toward 10 psi but the final spike is obscured by a Demon head. Cute. There's a hint at horsepower and torque numbers in a graph on the Dyno page, which shows both peaking around 750. In every shot of this video, the clock is set to 7:57, which we think means it either has that much power or, well, more. We think there's more to it because it appears that part of the graph above the dyno run shown, which would reach to 800 or 850, has been blanked out. A horsepower total of 808 would be a nice complement to the Hellcat's 707, don't you think? We can see from the shift indicator screen that the car will come with or at least offer the eight-speed automatic that's also available in the Hellcat and other Challengers. That's likely to be the best option for drag racing. The Demon's user-defined shift light feature, which lets you choose an optimal shift rpm for each individual gear, also suggests that a six-speed manual will be available. We'll cover the many modes and settings highlighted in this video in a separate post. There's a lot to discuss. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge Challenger Hellcat drift video is pure horsepower porn

We could listen to the whining, snarling 6.2-liter Hemi V8 in the Dodge Challenger and Charger Hellcats all day long. The noise just sounds like power that's being barely restrained and is everything about a muscle car that's right. The team at Pennzoil apparently understands that allure, too. The oil company has a new video where it lets the engine roar for over a minute, while a Challenger does some big, smoky drifts through an abandoned city. The whole stunt is edited together in a slickly produced way that looks fantastic. Although, the big finale might go a little too far and starts straining believability. Nonetheless, the Hellcat's wonderful noise is still the star of this show. Related Video:

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.