Fwd 4dr Se Low Miles Sedan Automatic Gasoline 2.4l Dohc Dual Vvt 16-valve I4 Eng on 2040-cars

Auto blog

Somebody created a Dodge Challenger SRT Demon droptop

The Dodge Challenger SRT Demon is a vehicle built with one purpose in mind: going fast down a drag strip. Weight is the enemy when it comes to acceleration, and one surefire way to add weight to a car is to make it into a convertible. However, that’s exactly what one Demon owner decided to do to their Challenger. Motor Authority spotted this Plum Crazy Demon convertible conversion for sale online, and the dealer and builder even spilled a few details on the car itself. This particular conversion was done by Droptop Customs, a shop with experience, having previously converted a couple Challengers into convertibles for Shaq in Miami. However, ripping the roof off the 840-horsepower Demon is no small task. ThatÂ’s a ridiculous amount of horsepower to handle for a car that has lost a fair amount of structural rigidity from removing the roof. The Droptop Customs sales manager told MA about the changes that were made to make this build work. To begin, the frame rails were reinforced with 1x2-inch pieces of metal. Then, the shop added diagonally-mounted metal braces underneath to resist twist. Even more structural supports were added to the trunk, front and rear shock towers, and gussets were added to the bottom of each door to keep them from moving. Lastly, the shop boxed the connection of the front rails to the engine cradle. No specifics about weight gain were provided. There is one sad bit of news about this Demon, though. The dealer told MA that itÂ’s currently on consignment, despite being listed for sale on FCA dealership Cape CoralÂ’s website. ItÂ’s priced at an eye-watering $145,995. But the new owner wonÂ’t have to manually put down the top! ThatÂ’s right, itÂ’s powered, and itÂ’s supposed to take about 20 seconds to lower or raise into place while stationary. Somehow, the car has only 172 miles on it, so itÂ’s hardly been used. We have no photos with the top up, so youÂ’ll have to settle for top-down photos for now. It looks like a professional job through and through, and we actually dig the convertible look. Plus, who doesnÂ’t love Plum Crazy? 

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Junkyard Gem: 1991 Dodge Monaco LE

When Chrysler took over the American Motors Corporation in 1987, the hot-selling Jeep brand was the big prize of that deal. At a stroke, Iacocca's company got the XJ Cherokee (which remained in production into our current century) plus its Comanche pickup sibling, the Wrangler, the Grand Wagoneer, and the AMC Eagle as bonuses. The Eagle gave its name to Chrysler's new marque, which worked out well for quite a few years, and of course the PowerTech V8 engine began life as an AMC design. Yes, Chrysler made out like a bandit on the AMC purchase, but one of the most important acquisitions that came with that coup ended up being a Renault design from the last gasp of Kenosha: the Eagle Premier. Genetic material from this car made its way into Chrysler products for decades to come, and the Dodge Division got the opportunity to slap Monaco badges on the Premier for the 1990 through 1992 model years. Here's one of those super-rare cars in a Denver self-service yard. Dodge sold plenty of Detroit-designed Monacos from the 1965 through 1978 model years, and so the name seemed ripe for a revival in 1990. We rated the 1974 Dodge Monaco "Bluesmobile" #3 on the Best Movie Cars of All Time list, and Monacos may be found in countless cop movies and TV shows over the decades. Did the name belong on a Renault design? Absolutely! The radical-looking and big-selling Chrysler LH cars were built on a modified Eagle Premier chassis, enabling Chrysler to print money from a 1980s Renault design all the way through 2004. After that, Mercedes-Benz engineering (with a dash of Mitsubishi thrown in for good measure) got stirred into the mix, but I'm told by a Chrysler engineer that you can still see the Renault 25 structure beneath the dashboard in modern Challengers and Chargers. All of this comes thanks to Lee Iacocca's score of that advanced European car way back in 1987. One thing from the Premier that Chrysler dropped like a monkey dropping a red-hot penny once production of the Premier/Monaco ended: the PRV V6, a sophisticated-but-flaky overhead-cam V6 originally developed by a partnership between Peugeot, Renault, and Volvo (hence the acronym). This engine achieved its greatest fame as the powerplant that went into the DeLorean DMC-12. You could get the chugging AMC 2.5-liter straight-four in the Eagle Premier, but all the 1990-1992 Monacos got the 3.0-liter PRV, rated at 150 horsepower.