Fwd 4dr Se Low Miles Sedan Automatic Gasoline 2.4l 4 Cyl Brilliant Black Crystal on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

Mopar maneuvers into SEMA with a multitude of modified models

As the aftermarket and performance arm of Fiat Chrysler Automobiles, Mopar has a duty to extract everything from the company's models that it can, and there's no better place to show all of its work off than the annual SEMA Show.
Dodge really gets in on the act this year with several customs to show off different parts of the brand's performance heritage. Perhaps the most interesting among them is the track-prepped Viper ACR Concept (pictured above). It wears a custom body kit to produce even more downforce, thanks in no small part to a monstrous wing at the back. To shed weight, most of the interior is stripped out, as well. Next up, the Challenger T/A Concept takes inspiration from '70s Trans-Am racing in a livery of Sublime Green and matte black paint. The center scoop in the hood keeps the 6.4-liter V8 fed with cool air, and the special's 20-by-9.5-inch matte black wheels keep it planted in the corners.
Also getting the once-over from Mopar is the Charger R/T. It wears the division's body kit, and under the hood, a cold-air intake keeps the 5.7-liter V8 breathing. The suspension is retooled to hold the road better with a coil-over kit, upgraded sway bars and strut tower braces for the front and rear. The company is also showing off a snazzy blue Charger with a mean look. The final Dodge getting work from Mopar is the Dart R/T Concept with bright, O-So-Orange paint and a matte black hood with a scoop hooked directly to the air intake. The performance-oriented design is finished off with a coil-over suspension and big brake kit, as well.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.