2014 Dodge Journey Se on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge pumps power to the people with $10 discount per horsepower

Dodge announced an incentive program named Power Dollars, which represents the next step in its mission to bring horsepower to the people. Starting on August 1, the automaker is luring enthusiasts into its showrooms by offering a $10 per horsepower discount on select models. The Power Dollars program applies to the 2019 Challenger (pictured), the 2019 Charger and the 2019 Durango. It's as simple as it sounds: if you buy a 500-horsepower car, you benefit from a $5,000 discount. The more horsepower you choose to put in your garage, the more money you save when you sign the dotted line. The 797-horsepower Challenger Hellcat Redeye comes with a $7,970 discount. At the other end of the spectrum, the Charger SXT powered by a 3.6-liter V6 rated at 292 horsepower is eligible for a $2,920 rebate.  The Grand Caravan has 283 horsepower, so it's not far from the Charger SXT, but it's not included in the program. The Journey with the same 3.6-liter V6 engine isn't in it, either. Dodge launched the Power Dollars program to boost sales, and likely to clear the remaining 2019 models out of its inventory before the 2020s arrive. But the company has another reason to make its muscle cars cheaper, one we don't think we've heard from an automaker yet. "Since bringing the Charger and the Challenger back to the market, Dodge has put 485 million horsepower into the hands of our loyal enthusiasts. The goal is to grow to a half-billion horsepower before the end of the year," explained Tim Kuniskis, the global head of Alfa Romeo, and FCA's head of passenger cars in North America, in a statement. It's 15 million horsepower short of the milestone. It needs to sell about 18,820 examples of the Hellcat Redeye to reach its goal, or approximately 51,370 units of the Charger SXT.   

2025 SRT Hellcat concepts as previewed by high schoolers

Fiat Chrysler Automobiles has some very talented designers in its ranks. Like any good company, though, the automaker is always on the lookout for early talent. Even if they're still in high school. One of those talent-seeking initiatives is the company's Drive for Design contest, an event open to tenth-, eleventh-, and twelfth-grade students that are hoping for a future in design. For this year's event, students from across the country were given a shot to design their vision for a 2025 model-year Dodge SRT Hellcat. The results are impressive, as you can see in the gallery above. First place went to Ben Treinen, from Archbishop Moeller High School in Cincinnati. Second place was the only award to go to a student outside the Rust Belt, with Macon, GA's Harrison Kunselman, a student at Mount de Sales Academy taking the silver. Third place was won by a metro Detroiter – Bloomfield Hills High School student Hwanseong Jang, while fourth went to Andrew Gombac of Loyola Academy in Wilmette, IL. According to FCA, all four winners will have their sketches on display at the 2016 Autorama at Cobo Center at the end of February. They'll also win some pretty nifty prizes. First place will get a new Apple MacBook Pro, while second, third, and fourth get the new Apple iPad Pro and Apple Pencil (arguably just as good of a prize for budding designers). All four finishers will also attend a three-week automotive design course at Detroit's prestigious College for Creative Studies, have dinner with FCA designers, and score three passes to Autorama. FCA will cover travel and lodging to Auburn Hills. Read on for the official blast from FCA. Related Video: FCA US Design Team Announces Winners of Drive for Design Contest January 19, 2016 , Auburn Hills, Mich. - The FCA US LLC Design team today announced four winners in this year's Drive for Design contest. The FCA US Drive for Design contest challenged U.S. high school students in grades 10-12 to design a Dodge SRT Hellcat for the year 2025. "The Drive for Design contest continues to be a great way for the FCA US Design team to connect with students that show an interest in art and design," said Mark Trostle – Head of Dodge and SRT Design, FCA US LLC.