2014 Dodge Journey Se on 2040-cars

Auto blog

Tempted by the Demon, dealers find way to thwart Dodge, jack up prices

It's the eternal story of short supply, big demand - and car dealers eager to exploit that dynamic, especially when it involves a hot car. A few weeks ago, when Dodge announced that it devised a way to attempt to prevent price-gouging on those 840-horsepower 2018 Dodge Demons, you just knew the dealers would dream up some devilish end-run. And sure enough, despite the manufacturer's best intentions, Demon order slots are being offered with five-figure markups. Here's how things were supposed to work: With a run of just 3,000 cars, Dodge knew it had to do something to address dealer greed, so it announced an allocation system: Cars purchased at or below the $86,090 MSRP would be the first orders filled and delivered. If a dealer sells an allocated Demon for more than sticker, that car goes to the end of the line for production and delivery. Dodge also ensured dealers wouldn't stockpile or hoard Demons by limiting the number of orders a dealer can submit and allocating cars to dealers based on how many Challenger and Charger Hellcats the dealer has sold. But Automotive News reports that some dealers are using intermediaries to auction off their Demon allocations on eBay. Three sellers last week said they were representing dealers in South Carolina, Tennessee and Louisiana, and auctioning off the right to buy a car in one of the priority spots at MSRP. The minimum bid for the right to buy the car at sticker? From $10,000-25,000. And previous transactions on eBay might have run as high as $75,000. So early buyers are definitely paying an upcharge - but it's a thing apart from the bottom line on the order form, where it appears they are paying MSRP. In other words, a scheme that violates the spirit of what FCA tried to do. A source at FCA told Automotive News the automaker was monitoring the practice but could do little to stop it. And the report quoted a Hellcat owner who said his dealership was ignoring Dodge's strictures altogether and offered him a Demon at MSRP plus $60K. But take heart. Not all car dealers are cynically opportunistic - or rather, some see an opportunity for doing good, not making buck. Automotive News says Bill Marsh Chrysler in Traverse City, Mich., plans to sell its single allocated Demon for $1 under MSRP - and is auctioning off the right to buy it, with the dealership's existing customers eligible to bid. The auction's proceeds will benefit four Traverse City charities.

Dodge restores Brass Monkey wheels to Challenger and Charger SRT Hellcat

For the first part of 2020, Dodge removed the option of its Devils Rim aluminum wheel design in Brass Monkey finish for the Hellcat-powered Challenger and Charger models. Mopar Insiders reports the wheels will return to the menu once Dodge starts production of its two muscle cars again, tidings to please forum members asking why they couldn't order the rims. The standard fit on the regular cars is a 20-inch Low Gloss Black Performance wheel, the options either a 20-inch Machined w/Granite Pocket wheel or a 20-inch Matte Vapor SRT aluminum wheel. On the widebody cars, standard fit is a 20-inch Carbon Black Aluminum wheel, one option being a 20-inch Warp Speed Granite wheel that's the same design as the Matte Vapor but with a different finish. The 20-inch Brass Monkeys are the second option on widebody versions of the Charger Hellcat and Hellcat Redeye, replacing the 20-inch Matte Vapor SRT Aluminum rim available on the non-widebody.   Those choices are on the Dodge configurator. At the time of writing, what's missing from the online tool are the Brass Monkey options for the standard Challengers and the Charger Hellcat Widedody models that MI says are coming. The wider versions of the Challenger Hellcat bolt on a set of 20-inchers that are 11 inches wide; we're told the standard cars will offer Brass Monkey rims in 20 x 9.5 inches. The Charger Hellcat only comes in two widebody versions, so it should get the 20x11-inch Brass Monkey wheels, but the options haven't showed up on the configurator. The sole choices at the moment are the Carbon Black Aluminum and Warp Speed Granite wheels. The other difference to note is that wheres the optional wheels on the Challenger all cost $1,095, the Charger's upgrades cost $1,295. Whenever production begins in Brampton, Ontario, again, the coveted wheels will bring another extra with them: Exterior badges done in a Black and Dark Bronze finish. Related Video:    

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.