2010 Dodge Journey Sxt on 2040-cars

Auto blog

Junkyard Gem: This 1987 Dodge 600 SE Sedan is suspiciously Benz-ish

The K Platform, introduced for the 1981 model year, saved Chrysler from certain bankruptcy. By 1983, a stretched-out K chassis had been developed; the Chrysler version was the E-Class, while Dodge had the 600. These cars have become all but extinct now, so this '87 600 sedan in a Denver-area wrecking yard is a noteworthy Junkyard Gem. Ford explicitly compared the appearance of the late-1970s Granada to that of the Mercedes-Benz W123 in their advertising, and so the ground was broken for Chrysler to make the allusions to Stuttgart machinery even more obvious a few years later. The name of the Chrysler E-Class was about as subtle as a tire iron blow to the kidneys, and the badging on its Dodge 600 sibling left little to the imagination. 600s came from the factory with several variations of the Chrysler 2.2/2.5 engine, as well as the Mitsubishi "Hemi 2.6" four-cylinder. This car has the 2.5 Chrysler engine, rated at 97 horsepower. Base price was $10,553, about $23,500 in 2017 dollars (the cheapest new Mercedes-Benz E-Class cost $38,600 in 1987, so there wasn't much customer overlap between the two cars). The 600s weren't bad cars for the price, though the build quality wasn't quite up to Mercedes-Benz standards. You'll find this thumbtack treatment on most K-Car headliners that still drive today. The interior is all tan and brown, with plenty of tough industro-velour upholstery and not-so-convincing artificial wood. Aluminum-faced home audio equipment was all the rage during the 1980s, and the trend spread to automotive controls. No cassette in this car, but at least it had AM and FM radio (even plain old mono AM radios were still expensive options on many cars as late as 1987, so the standard AM/FM stereo rig in the 600 was an attractive deal). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't beat the 600!

Dodge Challenger spied exercising supercharged Hellcat Hemi V8

One of the prime complaints against the Dodge Challenger is that, even in SRT8 guise, its 470 horsepower is responsible for hauling over 4,200 pounds of vehicle. For comparison, the 420 hp in the Ford Mustang GT only has to deal with 3,618 lbs. Things only get worse from there, as the higher-performance variants of both the Mustang and the Chevrolet Camaro are far more powerful than an SRT8 without adding on much heft.
So what is Chrysler to do? The correct answer is add a whole lot more grunt to its hefty two-door and even the odds. That's where the all-new Hellcat engine comes into play. We reported on this engine in May, and suggested that the Hellcat, a supercharged powerplant based on a 6.4-liter V8, would easily generate 500 to 570 hp and could likely arrive boasting more than 600 ponies.
Chrysler's ace in its sleeve has now been spied testing, with a number of Hellcat-equipped Challengers running the potent new engine both in more urbanized areas and under the sun of Death Valley. The hoods on these testers have been raised to accommodate the engine, and that camouflage over the fascias of these prototypes is there to hide a larger air intake. We also note what appears to be a new split grille under wraps. As for power output, our spies are now suggesting a Viper-equalling 640 hp from the Hellcat-equipped cars.

Dodge Viper now available in matte finish

The prospect of buying a new Dodge Viper just got that much more enticing with the introduction of matte-finish paint direct from the factory. Available as part of the "1 of 1" customization program, the matte finishes aren't being offered in just a handful of colors like some other automakers do: customers will be able to specify a matte finish on any of the 8,000 colors that are already part of the program's palette. The matte finish option adds yet another step to the exhaustive hand-painting process that Dodge offers on the Viper - a painstaking endeavor that takes upwards of 145 man hours to complete. Specialists start by applying a base coat and a clear finish, followed by the paint and clear coat. The finished body panels are then smoothed with 1,000-grit paper and polished. A second sanding process is required for the matte finish before the application of a matte clear coat. Specify custom stripes (available in five colors or by custom order) and they're applied under the paint, not as decals on top. The availability of the matte finish in conjunction with the stripe options and new satin badging and fuel cap leads to over 50 million combinations. Needless to say, that means no two Vipers need ever leave the Conner Avenue assembly plant the same – though there will surely always be certain favorite combinations, especially on those units ordered from outside the customization program. Related Video: DODGE EXPANDS INDUSTRY-FIRST '1 OF 1' VIPER CUSTOMIZATION PROGRAM WITH NEW MATTE-FINISH PAINT OPTION - New matte-finish exterior paint available on all of Viper '1 of 1' program's 8,000 exterior color options and 24,000 stripe options - Viper's custom '1 of 1' exterior paint options double to 16,000 exterior colors and 48,000 unique strip combinations - Matte finish available in all exclusive '1 of 1' program and standard production colors - In addition to matte-finish exterior paint, Viper customers can choose between satin chrome or satin black badging and fuel filler door for a sinister appearance - Dodge Viper owners can build their one-of-a-kind Viper from more than 50 million unique build configurations for the ultimate in model year exclusivity June 19, 2015 , Auburn Hills, Mich. - The Dodge brand continues to expand the Viper's exclusive production elements like never before.