New 2013 Dodge Grand Caravan Sxt Dvd Power Options Back-up Camera L@@k on 2040-cars

Auto blog

Stellantis pledges $2.8 billion investment in Canadian plants

Stellantis has re-upped its commitment to two pivotal Canadian factories. The Brampton Assembly Plant, where the Chrysler 300, Dodge Charger and Dodge Challenger are built, and the Windsor Assembly Plant, where the Chrysler Pacifica minivan is made, will receive a $2.8 million investment in the coming years.  The announcement came as welcome news for Brampton, as the plant's future was very much in doubt. The company had only promised to build the three models, sharing an aged platform, through 2023. Now the future is more clear. Stellantis will begin retooling the facility in 2024 once production of the muscle car trio winds down. When it comes back online in 2025, it will produce "at least one all-new electric model". It will also serve as the production facility for an all-new flexible architecture, but which models it will support were not disclosed. As for Windsor, retooling will begin in 2023. Stellantis didn't say when it would finish, but that it would be home to a "new multi-energy vehicle (MEV) architecture that will provide battery-electric (BEV) capability for multiple models." Both plants are expected to return to a three-shift schedule after layoffs at the plants dropped them down to two shifts. The reaffirmation of investment in Canada follows last month's announcement that Stellantis and LG Energy Solution would establish a $4.1 billion joint venture to make battery packs for electric vehicles. The project is being billed as Canada's first large-scale lithium-ion battery plant. In addition, Windsor's Automotive Research and Development Centre (ARDC) will now become North America's first battery lab. Stellantis is expanding the site by 100,000 square feet, where engineers will conduct R&D into BEV, PHEV and HEV cells, modules and battery packs. Stellantis North America Chief Operating Officer Mark Stewart said, "These investments reaffirm our long-term commitment to Canada and represent an important step as we move toward zero-emission vehicles that deliver on our customers’ desire for innovative, clean, safe and affordable mobility.”  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Dodge Durango gets performance Mopar options for R/T, SRT

Fiat Chrysler is showing new performance add-ons for the 2018 Dodge Durango R/T and SRT models at the Chicago Auto Show, including the familiar Dodge dual center stripes and a new Mopar exhaust system. The 475-horsepower SRT model, which is powered by a 6.4-liter Hemi V8, will also offer a lowering spring kit and a carbon-fiber instrument panel. The signature two-stripe treatment blankets the three-row SUV from the front to rear fascia and is tailored to the signature NACA duct-hood vent. It'll come in five different colors — bright blue, flame red, gunmetal low gloss (metallic finish), low-gloss black and sterling silver — and retail for $1,195 starting in March. View 7 Photos Mopar developed its new bolt-on performance exhaust systems with Dodge SRT engineers and designers to improve flow and achieve that sweet sound. It features a chromium 304 stainless steel construction to make it more resistant to corrosion, with stainless steel band-style clamps and welded and polished 4-inch tips. It costs $1,595 for the Durango R/T and is available now. On the SRT, the price goes up to $1,850, with the package available in the second quarter. New Mopar springs improve the Durango SRT's high-speed cornering stability and consistency by lowering the SUV an average of 15 millimeters, or 0.6 inches. They were developed with proprietary Dodge SRT data not available to the aftermarket to tune the lowering springs to the factory dampers, giving the vehicle less rear-end squat during acceleration, less nose dive while braking and reduced body roll on corners. MSRP on the package, which is available now, is $325. For just under $2,500 you can get the SRT Interior Appearance Group package, which adds a premium-wrapped carbon-fiber instrument panel and door bezels, Dinamica soft-touch headliner and accent paint on speaker trim rings. The Chicago Auto Show is open to the public Feb. 10-19. Related Gallery 2018 Dodge Durango R/T, SRT Mopar performance options Image Credit: Live photos copyright 2017 Drew Phillips / Autoblog.com Chicago Auto Show Dodge SUV Performance tuning sport utility vehicle