Dual Power Sliding Doors Stow N Go Rear Ac Cd 7 Passenger on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

The Dodge Demon sheds some weight in pursuit of speed

The Dodge Demon teaser train isn't stopping until it hits New York City. In case you need a reminder, the upcoming Demon is the more pedestrian Hellcat's stripped-down and hopped-up sibling that promises to be built for the sole purpose of traveling a quarter-mile mile quicker than any of its rivals. The weekly video rollout on www.ifyouknowyouknow.com continues with the latest sneak peak, "Reduction." While there were early rumors that the Demon may pack an all-wheel-drive system and in turn gain enough grip to rotate the Earth underneath it, Dodge and SRT look to be going down a simpler route. The press release reveals the Demon is 200 pounds lighter than the standard Hellcat. It's unclear where all that weight is coming from, but at nearly 4,500 pounds, the Challenger Hellcat could stand to go on a bit of a diet. The video hints at adjustments to the wheels, steering, suspension, and brakes, as well as some modifications to the car's interior. Don't be surprised if the Demon is a bare bones stripper model with no back seat, no A/C, and no radio. Who needs music when you have 2.4-liter supercharger and a 6.2-liter Hemi V8 making sweet love under the hood? Related Video: Image Credit: FCA Design/Style Marketing/Advertising New York Auto Show Dodge Coupe Future Vehicles Special and Limited Editions Performance dodge demon dodge hellcat

Chrysler recalling 280k Dodge Ram 1500 pickups over axle seizures

Following a June investigation by the National Highway Traffic Safety Administration, Fiat Chrysler Automobiles will be recalling 280,000 Dodge Ram pickups from model year 2005. The issue, NHTSA told The Detroit News, centered on a loose pinion nut, which could cause the rear axle to seize and, potentially, the driveshaft to detach. The affected vehicles were built between January of 2004 and August of 2005, while of the 280,000 trucks, only 257,000 were sold in the US market. According to The News, the recall will begin on February 13, and will see owners report to dealerships to have "a retention feature" added to the pinion nut.