2019 Dodge Grand Caravan on 2040-cars

Auto blog

2015 Dodge Challenger SRT Hellcat [w/videos]

Darrell Waltrip once said, "If the lion didn't bite the tamer every once in a while, it wouldn't be exciting." The sentiment behind that aphorism is causing my adrenal gland to wake up as Dodge and SRT drivers and engineers - somber-faced to a man - give me the track talk that will precede my driving the 2015 Dodge Challenger SRT on the circuit at Portland International Raceway. PIR might not be Daytona, and the 707-horsepower Challenger Hellcat might seem tame to a legend like ol' Jaws, but there's a not-small part of me that's thinking about how hard Dodge's fire-breathing kitty might bite.
Just a few hours previous, I'd gotten behind the wheel of the Hellcat for the first time, letting its hyperbole-spitting, supercharged V8 Hemi pull me yieldingly through Portland's morning commuter traffic. Lulled into a cocky certainty by the Challenger's good manners at low speed, I drove the throttle just a hair too deep, too fast when I ran on to the highway ramp. For just an instant the rear tires were utterly drenched in torque, and the back end of the big Dodge loosened up like a drift car on a wet track. Throttle steer lives at the fleeting whim of your right foot in this car.
It was no big thing to lay off the gas and pull the Hellcat back in line as I entered the highway, but the incident did get me to thinking: What will this car do to me on a road course?

Somebody created a Dodge Challenger SRT Demon droptop

The Dodge Challenger SRT Demon is a vehicle built with one purpose in mind: going fast down a drag strip. Weight is the enemy when it comes to acceleration, and one surefire way to add weight to a car is to make it into a convertible. However, that’s exactly what one Demon owner decided to do to their Challenger. Motor Authority spotted this Plum Crazy Demon convertible conversion for sale online, and the dealer and builder even spilled a few details on the car itself. This particular conversion was done by Droptop Customs, a shop with experience, having previously converted a couple Challengers into convertibles for Shaq in Miami. However, ripping the roof off the 840-horsepower Demon is no small task. ThatÂ’s a ridiculous amount of horsepower to handle for a car that has lost a fair amount of structural rigidity from removing the roof. The Droptop Customs sales manager told MA about the changes that were made to make this build work. To begin, the frame rails were reinforced with 1x2-inch pieces of metal. Then, the shop added diagonally-mounted metal braces underneath to resist twist. Even more structural supports were added to the trunk, front and rear shock towers, and gussets were added to the bottom of each door to keep them from moving. Lastly, the shop boxed the connection of the front rails to the engine cradle. No specifics about weight gain were provided. There is one sad bit of news about this Demon, though. The dealer told MA that itÂ’s currently on consignment, despite being listed for sale on FCA dealership Cape CoralÂ’s website. ItÂ’s priced at an eye-watering $145,995. But the new owner wonÂ’t have to manually put down the top! ThatÂ’s right, itÂ’s powered, and itÂ’s supposed to take about 20 seconds to lower or raise into place while stationary. Somehow, the car has only 172 miles on it, so itÂ’s hardly been used. We have no photos with the top up, so youÂ’ll have to settle for top-down photos for now. It looks like a professional job through and through, and we actually dig the convertible look. Plus, who doesnÂ’t love Plum Crazy? 

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant