2014 Dodge Grand Caravan Avp/se on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Stellantis reports surprising 2020 results, is 'off to a flying start'

MILAN — Low global car inventories and cost cuts should boost Stellantis's profit margins this year, though a shortage of semiconductors and investments in electric vehicles could weigh on results, the newly-formed automaker said on Wednesday. The forecast came as Stellantis, created by the January merger of Peugeot-maker PSA and Fiat Chrysler (FCA), reported better-than-expected results for 2020 that sent its shares up around 3% in morning trading. "Stellantis gets off to a flying start and is fully focused on achieving the full promised synergies (from the merger)," Chief Executive Carlos Tavares said in a statement. Stellantis is the world's fourth largest carmaker, with 14 brands including Fiat, Peugeot, Opel, Jeep, Ram and Maserati. It said 2021 results should be helped by three new high-margin Jeep vehicles in North America and a strong pricing environment there. The U.S. market has driven profits for years at FCA and starts off as the strongest part of Stellantis. The group's guidance assumes no more significant lockdowns caused by the global COVID-19 pandemic, which shuttered auto plants around the world last spring. Stellantis should also get a lift as its starts to implement a plan aimed at delivering over 5 billion euros a year in savings, without closing any plants. Tavares has also pledged not to cut jobs. But a pandemic-related global shortage of semiconductors, used for everything from maximizing engine fuel economy to driver-assistance features, could hurt business. Auto industry executives have said the shortage should ease by the second half of 2021. Stellantis said its "electrification offensive" could also weigh on results this year. Automakers are racing to develop electric vehicles to meet tighter CO2 emissions targets in Europe and this week Volvo joined a growing number of carmakers aiming for a fully-electric line-up by 2030. Stellantis plans to have fully-electric or hybrid versions of all of its vehicles available in Europe by 2025, broadly in line with plans at top rivals such as Volkswagen and Renault-Nissan, although Stellantis has further to go to meet that goal. The carmaker is targeting an adjusted operating profit margin of 5.5%-7.5% this year. That compares with a 5.3% aggregated margin last year: 4.3% at FCA and 7.1% at PSA excluding a controlling stake in parts maker Faurecia, which is set to be spun-off from Stellantis shortly.

Dodge Charger SRT Hellcat Redeye Widebody expected for 2021

As of writing, Dodge still won't confirm that a Charger SRT Hellcat Redeye Widebody exists, even though camouflaged and debadged versions have already been spotted. Furthermore, before the automaker was forced to cancel this year's LX Sprint Fest 15, a poster advertising the event pictured a Charger SRT with a Dodge Demon-like hood, thought perhaps to be a "concept" version of the sedan in question. Once expected as a product for the 2020 model year, the sedan according to Mopar Insiders is now on the way for 2021 with tweaked looks to go with the centerpiece 6.2-liter Hemi V8 with 797 horsepower and 717 pound-feet of torque. The biggest cosmetic change will be the hood, a larger, redrawn center scoop dominating the front and feeding a cold-intake system pulled from the Demon. The two heat extractors move further back on the hood and rotate 90 degrees to face the sides of the sedan instead of facing the windshield. It will be available only in widebody form, and Redeye badges will adorn the grille, fenders, and decklid. Under the skin, changes compared to the Charger SRT Hellcat include a 6,500-rpm redline, 500 rpm higher than the 707-hp Charger Hellcat, a second dual-stage fuel pump, fitment of the SRT Power Chiller and the SRT After-Run Chiller also from the Demon, as well as stronger prop shafts and half-shafts. MI also mentioned the availability of either a standard 2.62 final drive ratio or an optional 3.09 final gear, production intent for concept wheels that were slated to show at LX Spring Fest, and a new SRT Performance Spoiler. The changes could drop the dash to 60 miles per hour a couple of tenths to 3.4 seconds, and get the widebody's top speed back over the 200-mph mark.  The question now is when the sedan will make its debut. MI thinks the Charger SRT Hellcat Redeye Widebody will first greet the public at FCA's What's New media roundup this summer. However, with this month still obscured by coronavirus clouds and even late summer events still being canceled, its impossible to know when we'll get a look at the new muscle sedan. Related Video: