2014 Dodge Grand Caravan Avp/se on 2040-cars

Auto blog

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Pondering the 2018 Dodge Demon and 2018 Honda Accord | Autoblog Podcast #521

On this week's Autoblog Podcast, Editor-in-chief Greg Migliore is joined by Associate Editor Reese Counts and, for the first time, Senior Editor, Green, John Beltz Snyder. We discuss the new 2018 Honda Accord dropping the V6, what the Dodge Demon means for FCA's future, and if Mercedes-Benz could sell a pickup truck in the US. Spend my money (your money, everyone's money) will be back next week. The rundown is below. Remember, if you have a car-related question you'd like us to answer or you want buying advice of your very own, send a message or a voice memo to podcast at autoblog dot com. (If you record audio of a question with your phone and get it to us, you could hear your very own voice on the podcast. Neat, right?) And if you have other questions or comments, please send those too. Autoblog Podcast #521Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Topics and stories we mention Rundown 00:00:00 - Intro + Demon 00:15:48 - Accord 00:28:48 - X-Class 00:43:10 - Outro Feedback Email – Podcast at Autoblog dot com Review the show on iTunes

Dodge Challenger ACR rumored finally on its way using Viper ACR as benchmark

In 1995, Dodge released the ACR Neon, an unlikely combination of cheap, compact American sedan and high-performance parts and engineering marked by initials standing for American Club Racer. Dodge sold a heap of them, so the automaker flexed the ACR brand's potential with the first ACR Viper in 1999. The racy coupes made huge noise for Dodge and the Viper. After the fourth-gen Viper ended production in 2010, Dodge took a Challenger ACR concept to SEMA in 2011. But instead of carrying the coupe to production, Dodge resurrected the Viper for 2013 and got one more Viper ACR model out during the last Viper's final years. With the Viper gone again, it appears Dodge is sorting out that Challenger ACR concept for real. Last October, Mopar Insiders reported the automaker was trying to get a Challenger ACR prepared for the model's 50th anniversary this year. The timing looks highly unlikely, but an Allpar source says the track-happy coupe is still coming, and with bonkers expectations and gear. We're talking about a big-boi widebody Challenger tuned to do hard laps, fast, around twisty circuits, all day long. An Allpar insider known as "Muther," a code name to tug at John le Carre's heart, said Dodge is considering two engines. Because the point of the car is to be raced and some series don't accept forced induction, one trim would fit the naturally aspirated 392 Hemi from the R/T Scat Pack. There's no telling if that motor would get a power bump, but the Challenger ACR concept upped its output slightly with measures like a cat-back exhaust. The other trim, naturally, would fit the 6.2-liter Hellcat Redeye V8.     Muther told Allpar that if engineers can get the car under 4,000 pounds, the math points to being within two seconds of the time set by the Viper ACR-E at Road America. That "E" represents the Extreme Aero Package, with addenda like a deeper front splitter, dive planes, and an adjustable, dual-element rear wing that helped the Viper ring up 14 lap records on U.S. tracks. The fastest time we know of for a Viper at Road America is from 2011, factory race driver Kuno Wittmer doing 2:20 even in a Gen IV Viper ACR. Wittmer's ride weighed 3,408-pounds. Dodge boffins want to get the Challenger ACR under 4,000 pounds. Achieving the weight goal would mean cutting at least 387 pounds from a standard R/T Scat Pack Widebody, and 512 pounds from the Hellcat Redeye Widebody if that trim has the same target.